You disabled Cookies or Javascript for this site. With Cookies and Javascript enabled CAMPUS offers extended functionality like datasheet comparison and property tables.
View Pinboard
0 grades on Pinboard

Grade not available on Pinboard
Grade available on Pinboard
Remember Pinboard settings for one day


View list of

CAMPUS® Datasheet | Rynite® 530HTE NC010


This datasheet of Rynite® 530HTE NC010 from DuPont Engineering Polymers is provided by the international plastics database CAMPUS.

This datasheet includes:

Rynite® 530HTE NC010 | PET-GF30 | DuPont Engineering Polymers
Rheologische EigenschaftenWertEinheitPrüfnorm
Schmelzevolumenrate, MVR 9 cm³/10min ISO 1133
Temperatur 280 °C ISO 1133
Belastung 2.16 kg ISO 1133
Verarbeitungsschwindung, parallel 0.1 % ISO 294-4, 2577
Verarbeitungsschwindung, senkrecht 0.6 % ISO 294-4, 2577
Mechanische EigenschaftenWertEinheitPrüfnorm
Zug-Modul 11000 MPa ISO 527-1/-2
Bruchspannung 170 MPa ISO 527-1/-2
Bruchdehnung 2.3 % ISO 527-1/-2
Charpy-Schlagzähigkeit, +23°C 70 kJ/m² ISO 179/1eU
Charpy-Kerbschlagzähigkeit, +23°C 9 kJ/m² ISO 179/1eA
Thermische EigenschaftenWertEinheitPrüfnorm
Schmelztemperatur, 10°C/min 252 °C ISO 11357-1/-3
Formbeständigkeitstemperatur, 1.80 MPa 233 °C ISO 75-1/-2
Formbeständigkeitstemperatur, 0.45 MPa 251 °C ISO 75-1/-2
Längenausdehnungskoeffizient, parallel 19 E-6/K ISO 11359-1/-2
Längenausdehnungskoeffizient, senkrecht 60 E-6/K ISO 11359-1/-2
Brennbarkeit bei nominal 1.5mm HB class IEC 60695-11-10
geprüfte Probekörperdicke 1.5 mm IEC 60695-11-10
UL Registrierung UL - -
Brennbarkeit bei Dicke h HB class IEC 60695-11-10
geprüfte Probekörperdicke 0.8 mm IEC 60695-11-10
UL Registrierung UL - -
Elektrische EigenschaftenWertEinheitPrüfnorm
Dielektrizitätszahl, 100Hz 4.2 - IEC 60250
Dielektrizitätszahl, 1MHz 4.1 - IEC 60250
Dielektr. Verlustfaktor, 100Hz 50 E-4 IEC 60250
Dielektr. Verlustfaktor, 1MHz 140 E-4 IEC 60250
Spezifischer Durchgangswiderstand 1E13 Ohm*m IEC 60093
Spezifischer Oberflächenwiderstand 1E13 Ohm IEC 60093
Elektrische Durchschlagfestigkeit 34 kV/mm IEC 60243-1
Andere EigenschaftenWertEinheitPrüfnorm
Dichte 1580 kg/m³ ISO 1183
Kennwerte f. rheologische Berechn.WertEinheitPrüfnorm
Dichte der Schmelze 1400 kg/m³ -
Diagramme
LTHA-Bruchspannung 3mm, Rynite® 530HTE NC010, PET-GF30, DuPont
LTHA-Elektrische Durchschlagfestigkeit 0mm, Rynite® 530HTE NC010, PET-GF30, DuPont
Merkmale
Verarbeitungsmethoden
Spritzgießen
Lieferformen
Granulat
Besondere Kennwerte
Stabilisiert/stabil Wärmeeinwirkung
Regionale Verfügbarkeit
Weitere Informationen
Spritzgießen
PREPROCESSING

Drying recommended = Yes
Drying temperature = 120°C
Drying time, dehumidified dryer = 4 h
Processing moisture content = <0.02 %

PROCESSING

Melt temperature optimum = 285°C
Melt temperature range = 280-300°C
Mold temperature optimum = 140°C
Mold temperature range = >95°C
Hold pressure range = 35-140 MPa


Moulding guide
Chemikalienbeständigkeit
Säuren
Essigsäure (5 Gew.-%) (23°C)
Citronensäurelösung (10 Gew.-%) (23°C)
Milchsäure (10 Gew.-%) (23°C)
Salzsäure (36 Gew.-%) (23°C)
Salpetersäure (40 Gew.-%) (23°C)
Schwefelsäure (38 Gew.-%) (23°C)
Schwefelsäure (5 Gew.-%) (23°C)
Chromsäurelösung (40 Gew.-%) (23°C)
Basen
Natriumhydroxidlösung (35 Gew.-%) (23°C)
Natriumhydroxidlösung (1 Gew.-%) (23°C)
Salmiakgeist (10 Gew.-%) (23°C)
Alkohole
Isopropanol (23°C)
Methanol (23°C)
Ethanol (23°C)
Kohlenwasserstoffe
n-Hexan (23°C)
Toluol (23°C)
Iso-Oktan (23°C)
Ketone
Aceton (23°C)
Ether
Diethylether (23°C)
Mineralöle
SAE 10W40 Mehrbereichsöl (23°C)
SAE 10W40 Mehrbereichsöl (130°C)
SAE 89/90 Getriebeöl (130°C)
Isolieröl (23°C)
Standard Treibstoff
ISO 1817 Treibstoff 1 (60°C)
ISO 1817 Treibstoff 2 (60°C)
ISO 1817 Treibstoff 3 (60°C)
ISO 1817 Treibstoff 4 (60°C)
Stdrd-Treibstoff o. Alkohol (vorzugsw. ISO 1817 Treibst. C) (23°C)
Stdrd-Treibstoff m. Alkohol (vorzugsw. ISO 1817 Treibst. 4) (23°C)
Dieselöl (vorzugsw. ISO 1817 Flüssigkeit F) (23°C)
Dieselöl (vorzugsw. ISO 1817 Flüssigkeit F) (90°C)
Dieselöl (vorzugsw. ISO 1817 Flüssigkeit F) (>90°C)
Salzlösungen
Natriumchloridlösung (10 Gew.-%) (23°C)
Natriumhypochloridlösung (10 Gew.-%) (23°C)
Natriumcarbonatlösung (20 Gew.-%) (23°C)
Natriumcarbonatlösung (2 Gew.-%) (23°C)
Zinkchloridlösung (50 Gew.-%) (23°C)
Andere
Ethylacetat (23°C)
Wasserstoffperoxid (23°C)
DOT Nr. 4 Bremsflüssigkeit (130°C)
Ethylenglycol (50 Gew.-%) in Wasser (108°C)
1 Gew.-% Nonylphenoxy- polyethenoxyethanol in Wasser (23°C)
Ölsäure (50 Gew.-%) + Olivenöl (50 Gew.-%) (23°C)
Wasser (23°C)
Deionisiertes Wasser (90°C)
Phenollösung (5 Gew.-%) (23°C)
All data provided according to ISO 10350 for single points and ISO 11403 for multipoints.

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
Test temperatures are 23°C unless otherwise stated.

The DuPont Oval Logo, DuPont™, The miracles of science™ and ® are trademarks or registered trademarks of DuPont Company.
Copyright© 2013 E.I. du Pont de Nemours and Company. All Rights Reserved.

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication.
This information may be subject to revision as new knowledge and experience becomes available.
The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be
valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.
The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute
for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes.
Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection
with any use of this information.
Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.
DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.

CAUTION: DO NOT USE DUPONT MATERIALS IN MEDICAL APPLICATIONS INVOLVING IMPLANTATION IN THE HUMAN BODY OR
CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES UNLESS THE MATERIAL HAS BEEN PROVIDED FROM DUPONT UNDER A
WRITTEN CONTRACT THAT IS CONSISTENT WITH DUPONT POLICY REGARDING MEDICAL APPLICATIONS AND EXPRESSLY
ACKNOWLEDGES THE CONTEMPLATED USE.

For further information, please contact your DuPont representative. You may also request a copy of DuPont POLICY Regarding Medical
Applications... H-50103-3 and DuPont CAUTION Regarding Medical Applications... H-50102-3.

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2014
 
Please drag slider to the right to unlock control points view