View list of
  • All DSM grades
  • All PA6 grades
  • All grades beginning with A

CAMPUS® datasheet | Akulon® F232


This datasheet of Akulon® F232 from DSM Engineering Plastics is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:

  Akulon® F232 | PA6 | DSM Engineering Plastics
Product Texts
Medium/High Viscosity, Extrusion Grade

ISO 1043 PA6

Akulon® polyamide 6 and 66 resins
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 3300 / - MPa ISO 527-1/-2
Yield stress 85 / - MPa ISO 527-1/-2
Yield strain 4 / - % ISO 527-1/-2
Nominal strain at break 35 / - % ISO 527-1/-2
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 220 / * °C ISO 11357-1/-3
Coeff. of linear therm. expansion (parallel) 100 / * E-6/K ISO 11359-1/-2
Electrical propertiesdry / condUnitTest Standard
Relative permittivity (100Hz) 3.4 / - - IEC 60250
Relative permittivity (1MHz) 3.1 / - - IEC 60250
Dissipation factor (100Hz) 65 / - E-4 IEC 60250
Dissipation factor (1MHz) 165 / - E-4 IEC 60250
Volume resistivity 1E13 / - Ohm*m IEC 60093
Surface resistivity * / 1E15 Ohm IEC 60093
Electric strength 25 / - kV/mm IEC 60243-1
Other propertiesdry / condUnitTest Standard
Water absorption 9.5 / * % Sim. to ISO 62
Humidity absorption 2.5 / * % Sim. to ISO 62
Density 1130 / - kg/m³ ISO 1183
Material specific propertiesdry / condUnitTest Standard
Viscosity number 210 / * cm³/g ISO 307, 1157, 1628
Rheological calculation propertiesValueUnitTest Standard
Ejection temperature 185 °C -
Test specimen productionValueUnitTest Standard
Processing conditions acc. ISO 1870 - ISO ....-2
Injection Molding, melt temperature 270 °C ISO 294
Injection Molding, mold temperature 80 °C ISO 10724
Injection Molding, injection velocity 200 mm/s ISO 294
Diagrams
Specific volume-temperature (pvT) , Akulon® F232, PA6, DSM
Characteristics
Processing
Other Extrusion
Delivery form
Pellets
Regional Availability
Disclaimer
 All information supplied by or on behalf of DSM in relation to its
products, whether in the nature of data, recommendations or otherwise,
is supported by research and, in good faith, believed reliable, but DSM
assumes no liability and makes no warranties of any kind, express or
implied, including, but not limited to, those of title, merchantability,
fitness for a particular purpose or non-infringement or any warranty
arising from a course of dealing, usage, or trade practice whatsoever
in respect of application, processing or use made of the aforementioned
information or product. The user assumes all responsibility for the use
of all information provided and shall verify quality and other properties or
any consequence from the use of all such information.

Typical values are indicative only and are not to be construed as being
binding specifications.

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991