View list of
  • All LANXESS grades
  • All PA6 grades
  • All grades beginning with D

CAMPUS® datasheet | Durethan® BM 25 FN20 DUS013


This datasheet of Durethan® BM 25 FN20 DUS013 from LANXESS Deutschland GmbH is provided by the international plastics database CAMPUS.

This datasheet includes:

  Durethan® BM 25 FN20 DUS013 | PA6-MX25 FR | LANXESS Deutschland GmbH
Product Texts
PA 6, 25 % mineral, injection moulding, halogen free flame retardant, optimized for laser marking (1064nm)
Rheological propertiesdry / condUnitTest Standard
Melt volume-flow rate, MVR 27 / * cm³/10min ISO 1133
Temperature 260 / * °C ISO 1133
Load 5 / * kg ISO 1133
Molding shrinkage, parallel 0.9 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.9 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 5700 / 2100 MPa ISO 527-1/-2
Stress at break 80 / 30 MPa ISO 527-1/-2
Strain at break 3 / 50 % ISO 527-1/-2
Charpy impact strength, +23°C 38 / 135 kJ/m² ISO 179/1eU
Thermal propertiesdry / condUnitTest Standard
Melting temperature, 10°C/min 220 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 90 / * °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 195 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 60 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 70 / * E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. V-2 / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
Burning Behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 3.0 / * mm IEC 60695-11-10
Electrical propertiesdry / condUnitTest Standard
Comparative tracking index 450 / - - IEC 60112
Other propertiesdry / condUnitTest Standard
Water absorption 6.7 / * % Sim. to ISO 62
Density 1430 / - kg/m³ ISO 1183
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Regional Availability
Disclaimer
This information and our  technical advice - whether verbal, in  writing
or by way of trials - are  given in good faith but without warranty, and
this  also  applies  where  proprietary  rights  of  third  parties  are
involved.  Our advice does not release you from  the obligation to check
its validity and to test our  products  as to their  suitability for the
intended processes and uses.  The  application, use  and  processing  of
our products and the products manufactured  by  you  on the basis of our
technical  advice  are  beyond our control and, therefore, entirely your
own  responsibility.  Our  products  are  sold  in  accordance  with our
General  Conditions of Sale and Delivery.
The values  stored in the databank should only be used as guidelines for
component   design.  In  giving  these  values  neither  guarantee,  nor
assurance of particular material properties can be given.

techcenter.lanxess.com

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012