View list of
  • All Polimeri grades
  • All PS grades
  • All grades beginning with E

CAMPUS® datasheet | EDISTIR® ICE R 830D


This datasheet of EDISTIR® ICE R 830D from Polimeri Europa is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Rheological calculation properties - Test specimen production - Diagrams
  EDISTIR® ICE R 830D | PS-I | Polimeri Europa
Product Texts
Symbol according to ISO 1043-1: PS-I

Designation: Thermoplastics ISO 2897-PS-I,G,088-03-07-12

Environmental stress cracking resistant (ESCR) HIPS.

ICE R 830D combines high impact strength with improved chemical resistance to oils, fats and chemical agents, such as detergents for both industrial and domestic use.

Developed in particular for the fridge sector where hydrocarbons are used as blowing agents for PU insulating foams.


Applications:

This grade is suitable for extrusion/thermoforming and injection moulding.

Typical applications are inner liners and frames for refrigerators and packaging containers for fatty foods. ICE R 830D significantly improves the wall thickness distribution in thermoforming and allows

to optimize the thickness of the original extruded sheet.

top
Rheological propertiesValueUnitTest Standard
Melt volume-flow rate (MVR) 3.3 cm³/10min ISO 1133
Temperature 200 °C ISO 1133
Load 5 kg ISO 1133
top
Mechanical propertiesValueUnitTest Standard
Tensile Modulus 1400 MPa ISO 527-1/-2
Yield stress 16 MPa ISO 527-1/-2
Yield strain 1.8 % ISO 527-1/-2
Nominal strain at break >50 % ISO 527-1/-2
Charpy impact strength (+23°C) N kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) 110 kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 10.5 kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 6 kJ/m² ISO 179/1eA
top
Thermal propertiesValueUnitTest Standard
Glass transition temperature (10°C/min) 94 °C ISO 11357-1/-2
Temp. of deflection under load (1.80 MPa) 70 °C ISO 75-1/-2
Vicat softening temperature (50°C/h 50N) 88 °C ISO 306
Coeff. of linear therm. expansion (parallel) 90 E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.5 mm IEC 60695-11-10
top
Electrical propertiesValueUnitTest Standard
Relative permittivity (100Hz) 2.5 - IEC 60250
Relative permittivity (1MHz) 2.5 - IEC 60250
Dissipation factor (100Hz) 3 E-4 IEC 60250
Dissipation factor (1MHz) 3 E-4 IEC 60250
Volume resistivity >1E13 Ohm*m IEC 60093
Surface resistivity >1E15 Ohm IEC 60093
Electric strength 65 kV/mm IEC 60243-1
top
Other propertiesValueUnitTest Standard
Water absorption 0.06 % Sim. to ISO 62
Humidity absorption 0.04 % Sim. to ISO 62
Density 1040 kg/m³ ISO 1183
top
Rheological calculation propertiesValueUnitTest Standard
Density of melt 950 kg/m³ -
Spec. heat capacity melt 2050 J/(kg K) -
top
Test specimen productionValueUnitTest Standard
Processing conditions acc. ISO 2900 - ISO ....-2
Injection Molding, melt temperature 220 °C ISO 294
Injection Molding, mold temperature 45 °C ISO 10724
Injection Molding, injection velocity 200 mm/s ISO 294
Injection Molding, pressure at hold 70 MPa ISO 294
top
Diagrams
Viscosity-shear rate , EDISTIR® ICE R 830D, PS-I, Polimeri
Shearstress-shear rate , EDISTIR® ICE R 830D, PS-I, Polimeri
Stress-strain , EDISTIR® ICE R 830D, PS-I, Polimeri
Secant modulus-strain , EDISTIR® ICE R 830D, PS-I, Polimeri
Specific volume-temperature (pvT) , EDISTIR® ICE R 830D, PS-I, Polimeri
Spec. enthalpy/mass-temp. (DSC) , EDISTIR® ICE R 830D, PS-I, Polimeri
top
Characteristics
Processing
Injection Molding, Film Extrusion, Sheet Extrusion, Other Extrusion, Thermoforming
Delivery form
Pellets
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding
0 Injection Molding
PREPROCESSING

Drying normally not required

 

PROCESSING

Typical processing temperature range:

    Melt temperature         210 - 260 °C

    Mold temperature          20  - 60 °C

Film extrusion
PREPROCESSING

Drying normally not required

 

PROCESSING

Melt temperature              210 -240 °C

Other extrusion
PREPROCESSING

Drying normally not required

 

PROCESSING

Melt temperature              210 -240 °C

Sheet extrusion
PREPROCESSING

Drying normally not required

 

PROCESSING

Melt temperature              210 -240 °C

top
Disclaimer
Dear CAMPUS User,

The data, information and suggestions are provided for guidance
purpose only.
The Company accepts no responsibility for the results obtained
therefrom, as neither for their utilisation in infringement of
possible patents rights.
All indicated data refer to natural grades.
On the subject of the experimental products, the Company reserves the
right to change without prewarning the characteristics, to optimise
the performances.

If you have any questions regarding CAMPUS, please send
an e-mail to:Pe Campus


For further information regarding Polimeri Europa:
	Polimeri Europa Homepage
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991