View list of
  • All BASF PU grades
  • All TPU grades
  • All grades beginning with E

CAMPUS® datasheet | Elastollan® 1185 A WM


This datasheet of Elastollan® 1185 A WM from BASF Polyurethanes GmbH is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Mechanical properties - Other properties - Diagrams
  Elastollan® 1185 A WM | TPU | BASF Polyurethanes GmbH
Product Texts
DESCRIPTION
Elastollan 1185 AWM is a polyether based TPU with plasticiser
for matt surfaces

SPECIAL PROPERTIES
excellent resistance to hydrolysis and good flexibility at
low temperature, resistance to microbiological attack,
good wear performance, high tensile strength, good damping behavior

TYPICAL APPLICATIONS
cable sheathing

OTHER HINTS
predrying: 2-3h at 100-110°C (air circulating oven) or
80-90°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance
top
Mechanical propertiesValueUnitTest Standard
Stress at 100% elongation 7 MPa ISO 527-1/-2
Stress at 300% elongation 13 MPa ISO 527-1/-2
Stress at break TPE 45 MPa ISO 527-1/-2
Strain at break TPE >300 % ISO 527-1/-2
Compression Set under constant strain (23°C) 20 % ISO 815
Compression Set under constant strain (70°C) 35 % ISO 815
Tear strength 55 kN/m ISO 34-1
Abrasion resistance 40 mm³ ISO 4649
Shore A hardness (3s) 87 - ISO 868
Shore D hardness (15s) 39 - ISO 868
top
Other propertiesValueUnitTest Standard
Density 1150 kg/m³ ISO 1183
top
Diagrams
Dynamic Shear modulus-temperature , Elastollan® 1185 A WM, TPU, BASF PU
Stress-Strain (TPE) , Elastollan® 1185 A WM, TPU, BASF PU
top
Characteristics
Processing
Profile Extrusion
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Disclaimer
The data contained in this publication are based on
our current knowledge and experience. In view of
the many factors that may affect processing and
application of our product, these data do not relieve
processors from carrying out their own investigations
and tests.  Any descriptions, drawings, photographs,
data, proportions, weights etc. given herein may
change without prior information and do not constitute
the agreed contractual quality of the product. It is
the responsibility of the recipient  of our products
to ensure that any proprietary rights and existing
laws and legislation are observed. NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OFMERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE MADE
REGARDING PRODUCTS DESCRIBED OR DESIGNS,
DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY
BE USED WITHOUT INFRINGING THEINTELLECTUAL
PROPERTY RIGHTS OF OTHERS.

In order to check the availability of products please
contact us or our sales agency.


For more information about our products contact your
local BASF representative or

    BASF Polyurethanes GmbH
    European Business Management
    Thermoplastische Polyurethane
    Elastogranstraße 60
    D-49448 Lemförde
    Deutschland
    Telefon ++49 5443 122500
    Telefax ++49 5443 122555
    e-mail: pu-elastomere@basf.com
    www.pu.basf.de 
CAMPUS® is a registered trademark of CWFG (Chemie Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt)
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991