View list of

CAMPUS® datasheet | Grilon EB 50 H DZ


This datasheet of Grilon EB 50 H DZ from EMS-GRIVORY | a unit of EMS-CHEMIE AG is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Rheological calculation properties - Diagrams
  Grilon EB 50 H DZ | PA6 | EMS-GRIVORY | a unit of EMS-CHEMIE AG
Product Texts
Product designation according to ISO 1874: PA 6-HI, BH, 34-020

 

Product Attributes

  Improved heat resistance

Markets

  Automotive
  Air intake sytems, Cooling and climate control
  Electricals & Electronics
  Cables & Tubes
  Industry & Consumer goods
  Hydraulics & Pneumatics
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 2300 / 700 MPa ISO 527-1/-2
Yield stress 60 / 35 MPa ISO 527-1/-2
Yield strain 4 / 20 % ISO 527-1/-2
Nominal strain at break 50 / >50 % ISO 527-1/-2
Charpy impact strength (+23°C) N / N kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) N / N kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 70 / N kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 20 / 20 kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 222 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 50 / * °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 90 / * °C ISO 75-1/-2
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.8 / * mm IEC 60695-11-10
top
Electrical propertiesdry / condUnitTest Standard
Volume resistivity 1E11 / 1E9 Ohm*m IEC 60093
Surface resistivity * / 1E10 Ohm IEC 60093
Electric strength 27 / 24 kV/mm IEC 60243-1
Comparative tracking index - / 425 - IEC 60112
top
Other propertiesdry / condUnitTest Standard
Water absorption 9 / * % Sim. to ISO 62
Humidity absorption 3 / * % Sim. to ISO 62
Density 1100 / - kg/m³ ISO 1183
top
Rheological calculation propertiesValueUnitTest Standard
Density of melt 935 kg/m³ -
Thermal conductivity of melt 0.22 W/(m K) -
Spec. heat capacity melt 2600 J/(kg K) -
Eff. thermal diffusivity 9.05E-8 m²/s -
Ejection temperature 195 °C -
top
Diagrams
Dynamic Shear modulus-temperature , Grilon EB 50 H DZ, PA6, EMS-GRIVORY
Dynamic Shear modulus-temperature , Grilon EB 50 H DZ, PA6, EMS-GRIVORY
top
Characteristics
Processing
Other Extrusion, Blow Molding
Delivery form
Pellets
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding
PREPROCESSING
Max. water content : <= 0.1 %
PROCESSING
Melt temperature : 260-280 °C
Mould wall temperature : 80 °C
Holding pressure : 300-800 bar
Screw : 50-100 rpm
Back pressure : 1-15 bar
Injection speed : 2
(1=slow, 3=medium, 5=fast)

Please consider the information about the application of the materials.
Blow molding
PREPROCESSING
Max. water content : <= 0.1 %
PROCESSING
Melt temperature : 240-260 °C
Grooved bush temp. : 120-160 °C
Barrel temp. : 240-260 °C
Head temp. : 230-250 °C

Please consider the information about the application of the materials.
top
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 (60°C)
ISO 1817 Liquid 2 (60°C)
ISO 1817 Liquid 3 (60°C)
ISO 1817 Liquid 4 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
1% nonylphenoxy-polyethyleneoxy ethanol in water (23°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Deionized water (90°C)
Phenol solution (5% by mass) (23°C)
top
Disclaimer
EMS-CHEMIE AG
Business Unit EMS-GRIVORY

Homepage : EMS-GRIVORY
eMail    : welcome@emsgrivory.com


In the line with the aims of CAMPUS, the values are intended to serve as
an aid in preselecting materials and  for an overview of the EMS-GRIVORY
product  range.  They  correspond  to our  current  knowledge,  a  legal
guarantee concerning the application and the manufacture can however not
be assumed.  This data does not  cancel the processor's  own testing and
inspection obligations.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991