View list of
  • All ARKEMA grades
  • All PA6 grades
  • All grades beginning with O

CAMPUS® datasheet | ORGALLOY LE 60LM


This datasheet of ORGALLOY LE 60LM from ARKEMA is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:
Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Test specimen production - Diagrams
  ORGALLOY LE 60LM | PA6... | ARKEMA
Product Texts
ORGALLOY LE 60LM 

LE series, flexible polyamide alloys: processability on PE screw, low 
moisture absorption, chemical resistance (no known solvents).

The grades referenced: lower in rigidity than LE 6000 (900 MPa).

See also : 

LE 60LMXV (500 MPa): 
Suited to the extrusion of tubes (hydraulic, pneumatic, painting ...)
and films.Injection moulding is also possible.
top
Rheological propertiesdry / condUnitTest Standard
Melt volume-flow rate (MVR) 1.5 / * cm³/10min ISO 1133
Temperature 235 / * °C ISO 1133
Load 2.16 / * kg ISO 1133
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus - / 700 MPa ISO 527-1/-2
Yield stress - / 32 MPa ISO 527-1/-2
Yield strain - / 6 % ISO 527-1/-2
Nominal strain at break - / >50 % ISO 527-1/-2
Charpy impact strength (+23°C) - / N kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) - / N kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 220 / * °C ISO 11357-1/-3
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.6 / * mm IEC 60695-11-10
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 3.2 / * mm IEC 60695-11-10
top
Electrical propertiesdry / condUnitTest Standard
Comparative tracking index * / 600 - IEC 60112
top
Other propertiesdry / condUnitTest Standard
Water absorption 6.4 / * % Sim. to ISO 62
Humidity absorption 1.8 / * % Sim. to ISO 62
Density 1020 / 1020 kg/m³ ISO 1183
top
Test specimen productionValueUnitTest Standard
Injection Molding, melt temperature 260 °C ISO 294
Injection Molding, mold temperature 60 °C ISO 10724
top
Diagrams
Viscosity-shear rate , ORGALLOY LE 60LM, PA6..., ARKEMA
Shearstress-shear rate , ORGALLOY LE 60LM, PA6..., ARKEMA
Dynamic Shear modulus-temperature , ORGALLOY LE 60LM, PA6..., ARKEMA
top
Characteristics
Processing
Injection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Blow Molding, Calandering, Transfer Molding, Thermoforming
Delivery form
Pellets
Special Characteristics
Platable, Light stabilized or stable to light, Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Other extrusion
PREPROCESSING
 

Max water content:      0,05-0,15       %

Notice text      :      ORGALLOY grades are delivered ready for use. 
   
                 :      If Orgalloy is not used within 4 hours of opening
                 :      the bag,the product should be redried at 90°C
                 :      during 4 hours.

PROCESSING
     

Melt temperature :      245-255 °C

Notice text      :      These products are well suited to the manufacture 
                 :      of blown films.Processable on a PE screw,
                 :      preferably 25D or greater. It is recommended to
                 :      avoid high levels of shearing action.

                 :      The ideal melt temperature is in the region of
                 :      250°C.For purging after use, it is suggested to
                 :      use HDPE MFI 0.5 or less.

                 :      In multilayer extrusion with PE : 200°C for the PE
                 :      screw and 230°C for Orgalloy.
top
Chemical Media Resistance
Acids
Sulfuric Acid (5% by mass) (23°C)
Bases
Sodium Hydroxide solution (1% by mass) (23°C)
Alcohols
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
Toluene (23°C)
Ketones
Acetone (23°C)
Standard Fuels
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Salt solutions
Zinc Chloride solution (50% by mass) (23°C)
top
Disclaimer

This database provides the main properties of technical thermoplastics
marketed by ARKEMA.

      The information contained in this document is based on trials carried
out by our Research Centres and data selected from the literature, but
shall in no event be held to constitute or imply any warranty,
undertaking, express or implied commitment from our part.
Our format specifications define the limit of our commitment.
No liability whatsoever can be accepted by ARKEMA with regard to the
handling processing or use of the product or products concerned which
much in all cases be employed in accordance with all relevant laws
and/or regulations in force in the country or countries concerned.

For information about the other products marketed
by our company consult :
ARKEMAGROUP.COM
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991