View list of
VDA CAMPUS Datasheet?
View Datasheet in other language
FREE DOWNLOAD
Interested inVDA CAMPUS Datasheet?
The CAMPUS desktop version
offers extended functionality!CAMPUS® datasheet | PEBAX MX 1205 SW 2
This datasheet of PEBAX MX 1205 SW 2 from ARKEMA is provided by the international plastics database CAMPUS.
CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.
PEBAX MX 1205 SW 2 | TPA | ARKEMA
Product Texts
POLYETHER BLOCK AMIDE (PEBA) PEBAX hardness 40 shore D Non plasticized flexible Polyamide Outstanding mechanical properties at low temperature (-40°C) Applications : molded parts for sport goods (softness, nice touch feeling ...) Industrial (damping properties, overmolding, resiliency...)
| Rheological properties | dry / cond | Unit | Test Standard |
| Molding shrinkage (parallel) | 0.4 / * | % | ISO 294-4, 2577 |
| Molding shrinkage (normal) | 1.1 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile Modulus | 88 / 81 | MPa | ISO 527-1/-2 |
| Stress at 50% strain | 7 / 7 | MPa | ISO 527-1/-2 |
| Stress at 10% elongation | 6 / * | MPa | ISO 527-1/-2 |
| Stress at 100% elongation | 9 / * | MPa | ISO 527-1/-2 |
| Stress at break TPE | 42 / * | MPa | ISO 527-1/-2 |
| Strain at break | >50 / >50 | % | ISO 527-1/-2 |
| Strain at break TPE | >300 / * | % | ISO 527-1/-2 |
| Charpy impact strength (+23°C) | - / N | kJ/m² | ISO 179/1eU |
| Charpy impact strength (-30°C) | - / N | kJ/m² | ISO 179/1eU |
| Charpy notched impact strength (+23°C) | - / N | kJ/m² | ISO 179/1eA |
| Charpy notched impact strength (-30°C) | - / N | kJ/m² | ISO 179/1eA |
| Compression Set under constant strain (23°C) | 37 / * | % | ISO 815 |
| Tear strength | 77 / * | kN/m | ISO 34-1 |
| Abrasion resistance | 40 / * | mm³ | ISO 4649 |
| Shore D hardness (15s) | 41 / * | - | ISO 868 |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature (10°C/min) | 147 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load (0.45 MPa) | 52 / * | °C | ISO 75-1/-2 |
| Burning Behav. at 1.5 mm nom. thickn. | HB / * | class | IEC 60695-11-10 |
| Thickness tested | 1.6 / * | mm | IEC 60695-11-10 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity (100Hz) | 9 / - | - | IEC 60250 |
| Relative permittivity (1MHz) | 6 / - | - | IEC 60250 |
| Dissipation factor (100Hz) | 2090 / - | E-4 | IEC 60250 |
| Dissipation factor (1MHz) | 1120 / - | E-4 | IEC 60250 |
| Volume resistivity | 1.60E11 / - | Ohm*m | IEC 60093 |
| Surface resistivity | * / 3E12 | Ohm | IEC 60093 |
| Electric strength | 43 / - | kV/mm | IEC 60243-1 |
| Comparative tracking index | * / 600 | - | IEC 60112 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 1.2 / * | % | Sim. to ISO 62 |
| Humidity absorption | 0.4 / * | % | Sim. to ISO 62 |
| Density | 1010 / 1010 | kg/m³ | ISO 1183 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Density of melt | 830 | kg/m³ | - |
| Thermal conductivity of melt | 0.18 | W/(m K) | - |
| Spec. heat capacity melt | 2500 | J/(kg K) | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection Molding, melt temperature | 220 | °C | ISO 294 |
| Injection Molding, mold temperature | 30 | °C | ISO 10724 |
| Injection Molding, injection velocity | 200 | mm/s | ISO 294 |
| Injection Molding, pressure at hold | 30 | MPa | ISO 294 |
Diagrams
Characteristics
Processing
Injection Molding, Film Extrusion, Profile Extrusion, Other Extrusion, Transfer Molding, Casting, Thermoforming
Delivery form
Pellets
Special Characteristics
Platable, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat, Transparent
Regional Availability
Other text information
Injection molding
PREPROCESSING
Max water content: 0.03 - 0.15 %
Notice text : Our products are delivered pre-dried and in sealed
: bags.Therefore, they do not require any drying
: stage before use:
: 1- Keep the bags at the workshop temperature for
: several hours before use.
: 2- Re-dry the product whenever the bags have
: remained open for more than 4 hours.
PROCESSING
Melt temperature : 180 - 240 °C
Mold temperature : 20 - 40 °C
Notice text : Under specific conditions, our product can easily
: withstand 20 to 30 degrees more than the
: recommended temperatures.
Film extrusion
PREPROCESSING
Max water content: 0.03 - 0.15 %
Notice text : Our products are delivered pre-dried and in sealed
: bags.Therefore, they do not require any drying
: stage before use:
: 1- Keep the bags at the workshop temperature for
: several hours before use.
: 2- Re-dry the product whenever the bags have
: remained open for more than 4 hours.
PROCESSING
:
Melt temperature : 190 - 220 °C
Other extrusion
PREPROCESSING
Max water content: 0.03 - 0.15 %
Notice text : Our products are delivered pre-dried and in sealed
: bags.Therefore, they do not require any drying
: stage before use:
: 1- Keep the bags at the workshop temperature for
: several hours before use.
: 2- Re-dry the product whenever the bags have
: remained open for more than 4 hours.
PROCESSING
Melt temperature : 160 - 180 °C
Profile extrusion
PREPROCESSING
Max water content: 0.03 - 0.15 %
Notice text : Our products are delivered pre-dried and in sealed
: bags.Therefore, they do not require any drying
: stage before use:
: 1- Keep the bags at the workshop temperature for
: several hours before use.
: 2- Re-dry the product whenever the bags have
: remained open for more than 4 hours.
PROCESSING
Melt temperature : 150 - 180 °C
Notice text : Due to elastic behaviour of this grade, it is
: necessary to usea special sizing device.Contact
: us for more information.
: Too high temperatures can generate sticking of the
: melt on the sizer.
Sheet extrusion
PREPROCESSING
Max water content: 0.03 - 0.15 %
Notice text : Our products are delivered pre-dried and in sealed
: bags.Therefore, they do not require any drying
: stage before use:
: 1- Keep the bags at the workshop temperature for
: several hours before use.
: 2- Re-dry the product whenever the bags have
: remained open for more than 4 hours.
PROCESSING
:
Melt temperature : 190 - 220 °C
Chemical Media Resistance
| Acids | |
 | Sulfuric Acid (38% by mass) (23°C) |
| Bases | |
| Sodium Hydroxide solution (1% by mass) (23°C) |
| Hydrocarbons | |
| iso-Octane (23°C) |
| Ketones | |
| Acetone (23°C) |
| Salt solutions | |
| Zinc Chloride solution (50% by mass) (23°C) |
| Other | |
| Water (23°C) |
Disclaimer
This database provides the main properties of technical thermoplastics
marketed by ARKEMA.
The information contained in this document is based on trials carried
out by our Research Centres and data selected from the literature, but
shall in no event be held to constitute or imply any warranty,
undertaking, express or implied commitment from our part.
Our format specifications define the limit of our commitment.
No liability whatsoever can be accepted by ARKEMA with regard to the
handling processing or use of the product or products concerned which
much in all cases be employed in accordance with all relevant laws
and/or regulations in force in the country or countries concerned.
For information about the other products marketed
by our company consult :
ARKEMAGROUP.COM
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991
CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991