View list of

CAMPUS® datasheet | POLYFORT® FIPP 20 T LE K1832


This datasheet of POLYFORT® FIPP 20 T LE K1832 from A. Schulman GmbH is provided by the international plastics database CAMPUS.

You may contact the supplier for more information about this grade.

This datasheet includes:
Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Rheological calculation properties
  POLYFORT® FIPP 20 T LE K1832 | PP-T20 | A. Schulman GmbH
Product Texts
20% talc filled low emission PP copolymer compound with increased impact strength for automotive interior parts (VW TL 52388-B); increased scratch resistance


top
Rheological propertiesValueUnitTest Standard
Melt volume-flow rate, MVR 7 cm³/10min ISO 1133
Temperature 230 °C ISO 1133
Load 2.16 kg ISO 1133
top
Mechanical propertiesValueUnitTest Standard
Tensile Modulus 1500 MPa ISO 527-1/-2
Yield stress 21 MPa ISO 527-1/-2
Yield strain 5 % ISO 527-1/-2
Nominal strain at break >50 % ISO 527-1/-2
Charpy impact strength, +23°C N kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 10 kJ/m² ISO 179/1eA
top
Thermal propertiesValueUnitTest Standard
Temp. of deflection under load, 1.80 MPa 48 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 103 °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 80 E-6/K ISO 11359-1/-2
top
Electrical propertiesValueUnitTest Standard
Relative permittivity, 100Hz 2.8 - IEC 60250
Relative permittivity, 1MHz 2.8 - IEC 60250
Dissipation factor, 100Hz 20 E-4 IEC 60250
Dissipation factor, 1MHz 10 E-4 IEC 60250
Volume resistivity >1E13 Ohm*m IEC 60093
Surface resistivity >1E15 Ohm IEC 60093
top
Other propertiesValueUnitTest Standard
Water absorption 0.04 % Sim. to ISO 62
Density 1050 kg/m³ ISO 1183
top
Rheological calculation propertiesValueUnitTest Standard
Thermal conductivity of melt 0.38 W/(m K) -
Spec. heat capacity of melt 1520 J/(kg K) -
Eff. thermal diffusivity 2.6E-7 m²/s -
Ejection temperature 100 °C -
top
Characteristics
Processing
Injection Molding
Delivery form
Granules
Additives
Release agent
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding
PREPROCESSINGPretreatment
Predrying usually not neccessary (2-4h / 80°C)

PROCESSINGProcessing:

Melttemperature230 - 270°C
Mouldtemperature40 - 70°C
top
Disclaimer
The information and recommendations contained in this document are based upon
data collected by A. Schulman and are believed to be reliable; however, because
A. Schulman cannot anticipate or control the many different conditions under
which this information and/or product may be used, no representation is made
and no warranty is given of any kind, express or implied, for completeness,
accuracy, availability, suitability, usefulness, commercial value, or non-violation
of intellectual property rights of information, recommendations, and products
and services directly or indirectly provided. A. Schulman assumes no responsibility
for the results of the use of products and processes described herein and expressly
disclaims the implied warranties of merchantability and fitness for a particular use

If there are questions to given information, to further properties or further A. Schulman
products please contact

                  A. Schulman GmbH
                  Huettenstrasse 211
                  50170 Kerpen
                  Tel: 02273 / 561-0
                  Contact: aschulman@de.aschulman.com
                               Subject: Material data
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012