View list of

CAMPUS® datasheet | POLYLUX® (MABS) Typ C2


This datasheet of POLYLUX® (MABS) Typ C2 from A. Schulman GmbH is provided by the international plastics database CAMPUS.

You may contact the supplier for more information about this grade.

This datasheet includes:

  POLYLUX® (MABS) Typ C2 | MABS-I | A. Schulman GmbH
Product Texts
Easy flow transparent ABS


Rheological propertiesValueUnitTest Standard
Melt volume-flow rate, MVR 18 cm³/10min ISO 1133
Temperature 220 °C ISO 1133
Load 10 kg ISO 1133
Molding shrinkage, parallel 0.4 % ISO 294-4, 2577
Molding shrinkage, normal 0.4 % ISO 294-4, 2577
Mechanical propertiesValueUnitTest Standard
Tensile Modulus 1900 MPa ISO 527-1/-2
Yield stress 44 MPa ISO 527-1/-2
Yield strain 3.5 % ISO 527-1/-2
Nominal strain at break 18 % ISO 527-1/-2
Charpy notched impact strength, +23°C 16 kJ/m² ISO 179/1eA
Thermal propertiesValueUnitTest Standard
Glass transition temperature, 10°C/min 115 °C ISO 11357-1/-2
Temp. of deflection under load, 1.80 MPa 79 °C ISO 75-1/-2
Temp. of deflection under load, 0.45 MPa 92 °C ISO 75-1/-2
Vicat softening temperature, 50°C/h 50N 93 °C ISO 306
Coeff. of linear therm. expansion, parallel 100 E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion, normal 100 E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB class IEC 60695-11-10
Thickness tested 1.6 mm IEC 60695-11-10
Electrical propertiesValueUnitTest Standard
Relative permittivity, 100Hz 3 - IEC 60250
Relative permittivity, 1MHz 2.8 - IEC 60250
Dissipation factor, 100Hz 160 E-4 IEC 60250
Dissipation factor, 1MHz 140 E-4 IEC 60250
Volume resistivity >1E13 Ohm*m IEC 60093
Surface resistivity >1E15 Ohm IEC 60093
Comparative tracking index 600 - IEC 60112
Other propertiesValueUnitTest Standard
Water absorption 0.7 % Sim. to ISO 62
Humidity absorption 0.35 % Sim. to ISO 62
Density 1090 kg/m³ ISO 1183
Rheological calculation propertiesValueUnitTest Standard
Density of melt 970 kg/m³ -
Thermal conductivity of melt 0.17 W/(m K) -
Eff. thermal diffusivity 7.5E-8 m²/s -
Ejection temperature 100 °C -
Test specimen productionValueUnitTest Standard
Processing conditions acc. ISO 10400 - ISO ....-2
Injection Molding, melt temperature 245 °C ISO 294
Injection Molding, mold temperature 60 °C ISO 10724
Injection Molding, injection velocity 250 mm/s ISO 294
Injection Molding, pressure at hold 100 MPa ISO 294
Characteristics
Processing
Injection Molding
Delivery form
Granules
Additives
Release agent
Special Characteristics
Platable, Transparent
Regional Availability
Other text information
Injection molding
PREPROCESSINGPretreatment
Predrying: 2-4h / 70°C

PROCESSINGProcessing:

Melttemperature200 - 240°C
Mouldtemperature40 - 80°C
Disclaimer
The information and recommendations contained in this document are based upon
data collected by A. Schulman and are believed to be reliable; however, because
A. Schulman cannot anticipate or control the many different conditions under
which this information and/or product may be used, no representation is made
and no warranty is given of any kind, express or implied, for completeness,
accuracy, availability, suitability, usefulness, commercial value, or non-violation
of intellectual property rights of information, recommendations, and products
and services directly or indirectly provided. A. Schulman assumes no responsibility
for the results of the use of products and processes described herein and expressly
disclaims the implied warranties of merchantability and fitness for a particular use

If there are questions to given information, to further properties or further A. Schulman
products please contact

                  A. Schulman GmbH
                  Huettenstrasse 211
                  50170 Kerpen
                  Tel: 02273 / 561-0
                  Contact: aschulman@de.aschulman.com
                               Subject: Material data

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012