View list of
- All A. Schulman grades
- All ABS grades
- All grades beginning with P
CAMPUS® datasheet | POLYMAN® (ABS) LP 137 A
This datasheet of POLYMAN® (ABS) LP 137 A from A. Schulman GmbH is provided by the international plastics database CAMPUS.
You may contact the supplier for more information about this grade.
POLYMAN® (ABS) LP 137 A | ABS | A. Schulman GmbH
Product Texts
Impact ABS grade with antistatic
| Rheological properties | Value | Unit | Test Standard |
| Melt volume-flow rate, MVR | 22 | cm³/10min | ISO 1133 |
| Temperature | 220 | °C | ISO 1133 |
| Load | 10 | kg | ISO 1133 |
| Mechanical properties | Value | Unit | Test Standard |
| Tensile Modulus | 2200 | MPa | ISO 527-1/-2 |
| Yield stress | 48 | MPa | ISO 527-1/-2 |
| Yield strain | 2.3 | % | ISO 527-1/-2 |
| Charpy impact strength, +23°C | N | kJ/m² | ISO 179/1eU |
| Charpy notched impact strength, +23°C | 18 | kJ/m² | ISO 179/1eA |
| Thermal properties | Value | Unit | Test Standard |
| Vicat softening temperature, 50°C/h 50N | 96 | °C | ISO 306 |
| Burning Behav. at 1.5 mm nom. thickn. | HB | class | IEC 60695-11-10 |
| Thickness tested | 1.5 | mm | IEC 60695-11-10 |
| UL recognition | UL | - | - |
| Electrical properties | Value | Unit | Test Standard |
| Volume resistivity | >1E13 | Ohm*m | IEC 60093 |
| Surface resistivity | >1E15 | Ohm | IEC 60093 |
| Other properties | Value | Unit | Test Standard |
| Density | 1050 | kg/m³ | ISO 1183 |
Diagrams
Characteristics
Processing
Injection Molding
Delivery form
Granules
Special Characteristics
Anti-static
Regional Availability
Other text information
Injection molding
PREPROCESSINGPretreatment
Predrying: 3-4h / 80°C
Predrying: 3-4h / 80°C
PROCESSINGProcessing:
| Melttemperature | 220 - 260 | °C |
| Mouldtemperature | 40 - 80 | °C |
Disclaimer
The information and recommendations contained in this document are based upon
data collected by A. Schulman and are believed to be reliable; however, because
A. Schulman cannot anticipate or control the many different conditions under
which this information and/or product may be used, no representation is made
and no warranty is given of any kind, express or implied, for completeness,
accuracy, availability, suitability, usefulness, commercial value, or non-violation
of intellectual property rights of information, recommendations, and products
and services directly or indirectly provided. A. Schulman assumes no responsibility
for the results of the use of products and processes described herein and expressly
disclaims the implied warranties of merchantability and fitness for a particular use
If there are questions to given information, to further properties or further A. Schulman
products please contact
A. Schulman GmbH
Huettenstrasse 211
50170 Kerpen
Tel: 02273 / 561-0
Contact: aschulman@de.aschulman.com
Subject: Material data
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012











