View list of

CAMPUS® datasheet | RADILON® S 38M


This datasheet of RADILON® S 38M from RadiciPlastics is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Material specific properties - Test specimen production
  RADILON® S 38M | PA6-I | RadiciPlastics
Product Texts
DESIGNATION:
Thermoplastics ISO1874-PA6,EG,22-020

BRIEF DESCRIPTION:
PA6 High viscosity general purpose extrusion grade.
Contains monomer, enhanced flexibility.
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 1500 / - MPa ISO 527-1/-2
Yield stress 45 / - MPa ISO 527-1/-2
Yield strain 8 / - % ISO 527-1/-2
Nominal strain at break >50 / - % ISO 527-1/-2
Charpy impact strength (+23°C) N / N kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) N / N kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 10 / - kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 217 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 50 / * °C ISO 75-1/-2
Vicat softening temperature (50°C/h 50N) 130 / * °C ISO 306
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.6 / * mm IEC 60695-11-10
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.8 / * mm IEC 60695-11-10
top
Electrical propertiesdry / condUnitTest Standard
Volume resistivity >1E13 / 1E13 Ohm*m IEC 60093
Surface resistivity * / 1E14 Ohm IEC 60093
Comparative tracking index * / 600 - IEC 60112
top
Other propertiesdry / condUnitTest Standard
Density 1140 / * kg/m³ ISO 1183
top
Material specific propertiesdry / condUnitTest Standard
Viscosity number 225 / * cm³/g ISO 307, 1157, 1628
top
Test specimen productionValueUnitTest Standard
Processing conditions acc. ISO 1874 - ISO ....-2
top
Characteristics
Processing
Injection Molding, Profile Extrusion
Delivery form
Pellets
Additives
Lubricants
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Profile extrusion
PREPROCESSING
Max. water content 0.2%
Drying temperature 80°C
Drying time 2-4h (dry air dryer)
PROCESSING
Melt temperature 230°C
top
Disclaimer
This database provides the technical properties
of thermoplastics produced and marketed by
RADICI NOVACIPS
and his subsidiaries companies:

RADILON® A          Polyamide 66
RADILON® S          Polyamide 6
RADILON® CA       Copolyamide 66/6
RADILON® CS       Copolyamide 6 semiaromatic
RADITER® B          Poly(butylene terephthalate)
RADIFLAM® A         Polyamide 66,  self-extinguishing
RADIFLAM® S         Polyamide 6,   self-extinguishing
RADIFLAM® B         Polybutylene terephthalate, self-extinguishing
HERAFLEX® A        Stirenic Thermoplastic Elastomer SEBS
HERAFLEX® E        Ether-Ester Thermoplastic Elastomer
HERAFLEX® B        Stirenic Thermoplastic Elastomer SBS
HERAFLEX® P        Modified Polypropylene
RADILENE® R        Polyethylene and Polypropylene

The data and graphs contained in this database were carried out
by our Research Centers and shall in no event be held to
constitute or imply any warranty, undertaking, express or
implied commitment from our part.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991