View list of
  • All ARKEMA grades
  • All PA12 grades
  • All grades beginning with R

CAMPUS® datasheet | RILSAN AESN O P302 TL


This datasheet of RILSAN AESN O P302 TL from ARKEMA is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:
Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Test specimen production - Diagrams
  RILSAN AESN O P302 TL | PA12 | ARKEMA
Product Texts
(Former designation : RILSAN MA 4403)

DESIGNATION ISO 1874-PA12-HIP, EHL, 22-004
 RILSAN
 Flexible grade for tubes extrusion. 
 Available colours : natural or black (AESN NOIR P302 TL)
 Light and thermal stabilized.

 Flexibility.
 High burst pressure and impact strength.
 Fit for use in a wide range of temperature.
 Very good chemical resistance.

 Example applications : Tubes for air brake applications for trucks.
 approved by ISO 7628, DIN 73378 (PA12-HIPHL), NFR 12632, SAEJ 844.
top
Rheological propertiesdry / condUnitTest Standard
Melt volume-flow rate (MVR) 13 / * cm³/10min ISO 1133
Temperature 235 / * °C ISO 1133
Load 5 / * kg ISO 1133
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 475 / 430 MPa ISO 527-1/-2
Yield stress 28 / 24 MPa ISO 527-1/-2
Yield strain 24 / 24 % ISO 527-1/-2
Nominal strain at break >50 / >50 % ISO 527-1/-2
Charpy impact strength (+23°C) N / N kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) N / N kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 46[P] / N kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 4 / 6 kJ/m² ISO 179/1eA
P: Partial Break
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 174 / * °C ISO 11357-1/-3
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.6 / * mm IEC 60695-11-10
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 3.2 / * mm IEC 60695-11-10
Oxygen index 20 / * % ISO 4589-1/-2
top
Electrical propertiesdry / condUnitTest Standard
Volume resistivity 1E12 / 1E12 Ohm*m IEC 60093
Surface resistivity * / 7E13 Ohm IEC 60093
Electric strength 41 / 41 kV/mm IEC 60243-1
Comparative tracking index * / 600 - IEC 60112
top
Other propertiesdry / condUnitTest Standard
Water absorption 1.2 / * % Sim. to ISO 62
Density 1030 / 1030 kg/m³ ISO 1183
top
Test specimen productionValueUnitTest Standard
Injection Molding, melt temperature 270 °C ISO 294
Injection Molding, mold temperature 50 °C ISO 10724
Injection Molding, pressure at hold 16 MPa ISO 294
top
Diagrams
Viscosity-shear rate , RILSAN AESN O P302 TL, PA12, ARKEMA
Shearstress-shear rate , RILSAN AESN O P302 TL, PA12, ARKEMA
Dynamic Shear modulus-temperature , RILSAN AESN O P302 TL, PA12, ARKEMA
Stress-strain , RILSAN AESN O P302 TL, PA12, ARKEMA
Secant modulus-strain , RILSAN AESN O P302 TL, PA12, ARKEMA
Stress-strain (isochronous) 23°C, RILSAN AESN O P302 TL, PA12, ARKEMA
Creep modulus-time 23°C, RILSAN AESN O P302 TL, PA12, ARKEMA
top
Characteristics
Processing
Injection Molding, Profile Extrusion, Other Extrusion
Delivery form
Pellets
Additives
Lubricants, Plasticizer
Special Characteristics
Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Profile extrusion

PREPROCESSING

Max water content: < 0.1  %

Notice text      :      RILSAN is delivered in sealed bags and is
                 :      ready for use.

                 :      Every opened bag of RILSAN which has not been
                 :      used within two hours must, as a precaution, be
                 :      re-dried.
                  
                 :      Drying conditions are 4 h at 80-90 °C in a
                 :      forced-air oven.

PROCESSING

Melt temperature : 190 - 250 °C
top
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
Ketones
Acetone (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 (60°C)
ISO 1817 Liquid 2 (60°C)
ISO 1817 Liquid 3 (60°C)
ISO 1817 Liquid 4 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (130°C)
Ethylene Glycol (50% by mass) in water (108°C)
top
Disclaimer

This database provides the main properties of technical thermoplastics
marketed by ARKEMA.

      The information contained in this document is based on trials carried
out by our Research Centres and data selected from the literature, but
shall in no event be held to constitute or imply any warranty,
undertaking, express or implied commitment from our part.
Our format specifications define the limit of our commitment.
No liability whatsoever can be accepted by ARKEMA with regard to the
handling processing or use of the product or products concerned which
much in all cases be employed in accordance with all relevant laws
and/or regulations in force in the country or countries concerned.

For information about the other products marketed
by our company consult :
ARKEMAGROUP.COM
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991