View list of

CAMPUS® datasheet | SCHULAMID® 6 GB 15 HV WIT


This datasheet of SCHULAMID® 6 GB 15 HV WIT from A. Schulman GmbH is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Material specific properties
  SCHULAMID® 6 GB 15 HV WIT | PA6-GB15 | A. Schulman GmbH
Product Texts
15% glass bead filled Polyamide 6 for gas or water injection technology


top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 3500 / - MPa ISO 527-1/-2
Yield stress 85 / - MPa ISO 527-1/-2
Yield strain 4 / - % ISO 527-1/-2
Charpy impact strength (+23°C) 33 / - kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 6 / - kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Temp. of deflection under load (1.80 MPa) 66 / * °C ISO 75-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
top
Electrical propertiesdry / condUnitTest Standard
Volume resistivity >1E13 / 1E10 Ohm*m IEC 60093
Surface resistivity * / >1E15 Ohm IEC 60093
top
Other propertiesdry / condUnitTest Standard
Density 1200 / - kg/m³ ISO 1183
top
Material specific propertiesdry / condUnitTest Standard
Viscosity number 160 / * cm³/g ISO 307, 1157, 1628
top
Characteristics
Processing
Injection Molding, Profile Extrusion
Delivery form
Granules
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding
Pretreatment
Predrying: 4-6h / 80°C

Processing:

Melttemperature250 - 270°C
Mouldtemperature60 - 90°C

top
Disclaimer
The properties given in this software are typical, non-binding
mean values found fpor injection moulded natural coloured test
bars. Pigments and other modification may alter these values.
The characteristic values are based on our know-how and experience.
They do not warrant any specific properties. All our products
must be subjected to in house tests and inspections by the user
before application. This applies above all with regard to their
suitability for a particular purpose. It also applies accordingly
for all other written or verbal information given by our personnel.
Our General Terms of Business apply in all other respects,
particulaly with regard to liability for material defects.

If there are questions to given information, to further
properties or further A. Schulman products please contact

                  A. Schulman GmbH
                  Huettenstrasse 211
                  50170 Kerpen
                  Tel: 02273 / 561-0
                  Contact: Dipl.-Ing. M. Berg
                           aschulman@de.aschulman.com
                           Subject: Material data
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991