View list of
  • All Rhodia grades
  • All PA66 grades
  • All grades beginning with T

CAMPUS® datasheet | Technyl® A 216 NAT FA


This datasheet of Technyl® A 216 NAT FA from Rhodia Polyamide Engineering Plastics is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:
Mechanical properties - Thermal properties - Electrical properties - Other properties - Material specific properties - Test specimen production - Diagrams
  Technyl® A 216 NAT FA | PA66 | Rhodia Polyamide Engineering Plastics
Product Texts
Unreinforced polyamide 66, medium viscosity, for injection moulding.

 

TECHNYL® A 216 Natural FA offers all of the primary properties of unreinforced polyamide 66, such as:

thermal and mechanical properties, impact resistance, abrasion and chemical resistance.

This product is designed to be used in food contact applications specifically for cooking utensils.

 

This product is available in natural and black colours.

top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 3000 / 1500 MPa ISO 527-1/-2
Yield stress 81 / 60 MPa ISO 527-1/-2
Yield strain 4.2 / 30 % ISO 527-1/-2
Charpy impact strength (+23°C) N / N kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 4.5 / 14 kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 263 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 75 / * °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 218 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion (parallel) 70 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion (normal) 25 / * E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. V-2 / * class IEC 60695-11-10
Thickness tested 1.6 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h V-2 / * class IEC 60695-11-10
Thickness tested 0.8 / * mm IEC 60695-11-10
UL recognition UL / * - -
Oxygen index 26.5 / * % ISO 4589-1/-2
top
Electrical propertiesdry / condUnitTest Standard
Relative permittivity (100Hz) 3.7 / 6 - IEC 60250
Relative permittivity (1MHz) 2.9 / 3.2 - IEC 60250
Dissipation factor (100Hz) 200 / 750 E-4 IEC 60250
Dissipation factor (1MHz) 300 / 800 E-4 IEC 60250
Volume resistivity >1E13 / 1E12 Ohm*m IEC 60093
Surface resistivity * / 1E13 Ohm IEC 60093
Electric strength 30 / 26 kV/mm IEC 60243-1
Comparative tracking index 600 / 575 - IEC 60112
top
Other propertiesdry / condUnitTest Standard
Water absorption 1.3 / * % Sim. to ISO 62
Density 1140 / - kg/m³ ISO 1183
top
Material specific propertiesdry / condUnitTest Standard
Viscosity number 130 / * cm³/g ISO 307, 1157, 1628
top
Test specimen productionValueUnitTest Standard
Injection Molding, melt temperature 225 °C ISO 294
Injection Molding, mold temperature 80 °C ISO 10724
top
Diagrams
Viscosity-shear rate , Technyl® A 216 NAT FA, PA66, Rhodia
Shearstress-shear rate , Technyl® A 216 NAT FA, PA66, Rhodia
Stress-strain , Technyl® A 216 NAT FA, PA66, Rhodia
Specific volume-temperature (pvT) , Technyl® A 216 NAT FA, PA66, Rhodia
top
Characteristics
Processing
Injection Molding
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,2% with a dehumidified air drying equipment at approx 80°C.
Recommended moulding conditions:

Barrel temperatures:

- feed zone 270 - 275°C

- compression zone 280 - 285°C

- front zone 285 - 290°C

Mould temperatures: 60 at 80°C

top
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Lactic Acid (10% by mass) (23°C)
Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
Standard Fuels
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Salt solutions
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethylene Glycol (50% by mass) in water (108°C)
50% Oleic acid + 50% Olive Oil (23°C)
Water (23°C)
Deionized water (90°C)
top
Disclaimer
WARRANTY

 This information is supplied to assist you in your choice of the
 material best suited to your requirements and does not in any way
 constitute a product specification.

 The values given relate to unpigmented materials (natural colour).
 Pigmentation can alter results. The characteristics supplied are
 typical values. Our specialists are available to advise you on the
 values to be used in order to carry out calculations correctly on
 part dimensions.

 The information contained in this document is supplied in good
 faith. However it is given purely as an indication. It shall not be
 considered in any way as a formal commitment or warranty on our part,
 notably in respect of the eventual infringement of any rights of
 third parties who may use our products. We remain at your entire
 disposal to provide you with any information that you might require.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991