View list of
  • All Rhodia grades
  • All PA66 grades
  • All grades beginning with T

CAMPUS® datasheet | Technyl® A 218 V40 black 21NHFE


This datasheet of Technyl® A 218 V40 black 21NHFE from Rhodia Polyamide Engineering Plastics is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:
Mechanical properties - Thermal properties - Other properties
  Technyl® A 218 V40 black 21NHFE | PA66-GF40 | Rhodia Polyamide Engineering Plastics
Product Texts
Polyamide 66, offering high flowability and productivity gains, reinforced with 40% of glass fibre, heat stabilized, for injection moulding.TECHNYL ® A 218 V40 BLACK 21NHFE is characterized by a high flowability and offers an excellent combination between thermal and mechanical properties.
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 13000 / 9600 MPa ISO 527-1/-2
Stress at break 220 / 155 MPa ISO 527-1/-2
Strain at break 2.5 / 3.5 % ISO 527-1/-2
Charpy impact strength (+23°C) 97 / 98 kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 15 / 19 kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 263 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 255 / * °C ISO 75-1/-2
top
Other propertiesdry / condUnitTest Standard
Water absorption 0.7 / * % Sim. to ISO 62
Density 1460 / - kg/m³ ISO 1183
top
Characteristics
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding
Recommended moulding conditions:

Barrel temperatures:

- feed zone 260 - 270°C

- Compression zone 270 - 280°C

- Front zone 280 - 290°C

Mould temperatures: 60 at 80°C

top
Disclaimer
WARRANTY

 This information is supplied to assist you in your choice of the
 material best suited to your requirements and does not in any way
 constitute a product specification.

 The values given relate to unpigmented materials (natural colour).
 Pigmentation can alter results. The characteristics supplied are
 typical values. Our specialists are available to advise you on the
 values to be used in order to carry out calculations correctly on
 part dimensions.

 The information contained in this document is supplied in good
 faith. However it is given purely as an indication. It shall not be
 considered in any way as a formal commitment or warranty on our part,
 notably in respect of the eventual infringement of any rights of
 third parties who may use our products. We remain at your entire
 disposal to provide you with any information that you might require.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991