View list of
  • All Rhodia grades
  • All PA66 grades
  • All grades beginning with T

CAMPUS® datasheet | Technyl® A 52 G1 MX 20


This datasheet of Technyl® A 52 G1 MX 20 from Rhodia Polyamide Engineering Plastics is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:
Mechanical properties - Thermal properties - Other properties - Test specimen production
  Technyl® A 52 G1 MX 20 | PA66-MF | Rhodia Polyamide Engineering Plastics
Product Texts
is a Polyamide 6.6 glow wire resistant , reinforced with mineral filler

 

Colors: it is marketed in black color.

 

TECHNYL A 52 G1 MX20 features the following properties:

• Glow wire resistant

• Good finishing

• Good dimensional stability

 

TECHNYL A 52 G1 MX20 is indicated for pieces with low warping and good behaviour at fire, as for example, circuit breakers (IEC NBR 60898) and boxes of fusers

top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 6800 / - MPa ISO 527-1/-2
Stress at break 60 / - MPa ISO 527-1/-2
Strain at break 1.3 / - % ISO 527-1/-2
Charpy impact strength (+23°C) 25 / * kJ/m² ISO 179/1eU
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 260 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 165 / * °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 230 / * °C ISO 75-1/-2
Burning Behav. at 1.5 mm nom. thickn. V-2 / * class IEC 60695-11-10
Thickness tested 1.6 / * mm IEC 60695-11-10
UL recognition UL / * - -
top
Other propertiesdry / condUnitTest Standard
Density 1350 / - kg/m³ ISO 1183
top
Test specimen productionValueUnitTest Standard
Injection Molding, mold temperature 80 °C ISO 10724
top
Characteristics
Processing
Injection Molding
Regional Availability
South and Central America
top
Other text information
Injection molding
To injection mould TECHNYL A 52 G1 MX20 , we suggest the following machine regulations:

 

 

• Cylinder Temperature:

    

feeding zone: 235º - 240º C

compression zone: 240° - 245°C

mixing zone: 245° - 250°C

nozzle: 260º - 275ºC

 

• Mould Temperature: 60-80ºC
top
Disclaimer
WARRANTY

 This information is supplied to assist you in your choice of the
 material best suited to your requirements and does not in any way
 constitute a product specification.

 The values given relate to unpigmented materials (natural colour).
 Pigmentation can alter results. The characteristics supplied are
 typical values. Our specialists are available to advise you on the
 values to be used in order to carry out calculations correctly on
 part dimensions.

 The information contained in this document is supplied in good
 faith. However it is given purely as an indication. It shall not be
 considered in any way as a formal commitment or warranty on our part,
 notably in respect of the eventual infringement of any rights of
 third parties who may use our products. We remain at your entire
 disposal to provide you with any information that you might require.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991