View list of
  • All Rhodia grades
  • All PA66 grades
  • All grades beginning with T

CAMPUS® datasheet | Technyl® D 247F


This datasheet of Technyl® D 247F from Rhodia Polyamide Engineering Plastics is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

This datasheet includes:
Thermal properties - Other properties - Test specimen production
  Technyl® D 247F | (PA66+PA610)-I | Rhodia Polyamide Engineering Plastics
Product Texts
Polyamide 66 & 610, impact modified, alkali resistance, mold release, for injection molding.

 

TECHNYL® D 247 F is used in all sectors of industry, offering high impact strength & excellent productivity.

 

This product is especially suitable for the following purposes:

 

- Battery gasket

 

This product is available in natural colors on request

top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 262 / * °C ISO 11357-1/-3
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 3.2 / * mm IEC 60695-11-10
UL recognition UL / * - -
top
Other propertiesdry / condUnitTest Standard
Density 1080 / - kg/m³ ISO 1183
top
Test specimen productionValueUnitTest Standard
Injection Molding, mold temperature 80 °C ISO 10724
top
Characteristics
Regional Availability
Europe
top
Other text information
Injection molding
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content less than 0,2% with a dehumidified air drying equipment at approximately 80°C.

 

Recommended moulding conditions:

 

-Barrel temperatures

Feed zone                 265~270°C

Compression zone      270~280°C

Front zone                 280~290°C

 

-Mould temperatures   60~80°C

top
Disclaimer
WARRANTY

 This information is supplied to assist you in your choice of the
 material best suited to your requirements and does not in any way
 constitute a product specification.

 The values given relate to unpigmented materials (natural colour).
 Pigmentation can alter results. The characteristics supplied are
 typical values. Our specialists are available to advise you on the
 values to be used in order to carry out calculations correctly on
 part dimensions.

 The information contained in this document is supplied in good
 faith. However it is given purely as an indication. It shall not be
 considered in any way as a formal commitment or warranty on our part,
 notably in respect of the eventual infringement of any rights of
 third parties who may use our products. We remain at your entire
 disposal to provide you with any information that you might require.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991