View list of
Printing Datasheets and Table?
View Datasheet in other language
FREE DOWNLOAD
Interested inPrinting Datasheets and Table?
The CAMPUS desktop version
offers extended functionality!CAMPUS® datasheet | Technylstar™ S 216 L2 V30 BLACK
This datasheet of Technylstar™ S 216 L2 V30 BLACK from Rhodia Polyamide Engineering Plastics is provided by the international plastics database CAMPUS.
CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.
Technylstar™ S 216 L2 V30 BLACK | PA6-GF30 | Rhodia Polyamide Engineering Plastics
Product Texts
TECHNYLSTAR polyamide reinforced with 30% GF, UV stabilised, for Injection moulding
TECHNYLSTAR TM S 216L2 V30 BLACK is characterised by general good mechanical properties and high impact resistance in external environment.
It is particularly suitable for automotive external parts requiring UV resistance, like door handles, windshield frames, etc
This product is available in black.
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile Modulus | 10400 / - | MPa | ISO 527-1/-2 |
| Stress at break | 160 / - | MPa | ISO 527-1/-2 |
| Strain at break | 2.1 / - | % | ISO 527-1/-2 |
| Charpy impact strength (+23°C) | 45 / * | kJ/m² | ISO 179/1eU |
| Charpy notched impact strength (+23°C) | 8.1 / * | kJ/m² | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature (10°C/min) | 222 / * | °C | ISO 11357-1/-3 |
Other text information
Injection molding
The material is supplied in airtight bags, ready for use. In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,15% with a dehumidified air drying equipment at approx 80°C.
Recommended moulding conditions:
Barrel temperatures :
- feed zone 220- 225°C
- compression zone 235 - 240 °C
-front zone 240- 245°C
Mould temperatures: 80 °C
Disclaimer
WARRANTY This information is supplied to assist you in your choice of the material best suited to your requirements and does not in any way constitute a product specification. The values given relate to unpigmented materials (natural colour). Pigmentation can alter results. The characteristics supplied are typical values. Our specialists are available to advise you on the values to be used in order to carry out calculations correctly on part dimensions. The information contained in this document is supplied in good faith. However it is given purely as an indication. It shall not be considered in any way as a formal commitment or warranty on our part, notably in respect of the eventual infringement of any rights of third parties who may use our products. We remain at your entire disposal to provide you with any information that you might require.
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991
CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991