View list of
  • All BASF grades
  • All PA6 grades
  • All grades beginning with U

CAMPUS® datasheet | Ultramid® B3G10 SI


This datasheet of Ultramid® B3G10 SI from BASF is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Rheological properties - Mechanical properties - Thermal properties - Other properties - Material specific properties - Diagrams
  Ultramid® B3G10 SI | PA6-GF50 | BASF
Product Texts
Glass fibre reinforced PA6-injection molding grade, surface improved.
top
Rheological propertiesdry / condUnitTest Standard
Melt volume-flow rate (MVR) 15 / * cm³/10min ISO 1133
Temperature 275 / * °C ISO 1133
Load 5 / * kg ISO 1133
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 16500 / 10800 MPa ISO 527-1/-2
Stress at break 235 / 160 MPa ISO 527-1/-2
Strain at break 3 / 5 % ISO 527-1/-2
Charpy impact strength (+23°C) 95 / 100 kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) 85 / - kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 20 / 25 kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 16 / - kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Temp. of deflection under load (1.80 MPa) 200 / * °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 215 / * °C ISO 75-1/-2
top
Other propertiesdry / condUnitTest Standard
Density 1570 / - kg/m³ ISO 1183
top
Material specific propertiesdry / condUnitTest Standard
Viscosity number 135 / * cm³/g ISO 307, 1157, 1628
top
Diagrams
Stress-strain , Ultramid® B3G10 SI, PA6-GF50, BASF
Secant modulus-strain , Ultramid® B3G10 SI, PA6-GF50, BASF
top
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Additives
Release agent
Regional Availability
Europe
top
Other text information
Injection molding
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 80 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 280 - 300 °C
injection molding, Melt temperature, recommended: 290 °C
injection molding, Mold temperature, range: 80 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
injection molding, Dwell time, thermoplastics: 10 min
top
Disclaimer
The data contained in this publication are based on our current
knowledge and experience. In view of the many factors that may affect
processing and application of our product, these data do not relieve
processors from carrying out their own investigations and tests. Any
descriptions, drawings, photographs, data, proportions, weights etc.
given herein may change without prior information and do not constitute
the agreed contractual quality of the product. It is the responsibility
of the recipient of our products to ensure that any proprietary rights
and existing laws and legislation are observed. NO WARRANTIES OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING
THEINTELLECTUAL PROPERTY RIGHTS OF OTHERS.

In order to check the availability of products please contact us or our
sales agency.


For more information about our products contact your local BASF
representative or

BASF SE
Dept. KS/KC
Fax: 0621-60-49497
e-mail: e-mail

CAMPUS® is a registered trademark of CWFG (Chemie
Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt)
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991