View list of
  • All BASF grades
  • All PA* grades
  • All grades beginning with U

CAMPUS® datasheet | Ultramid® D3EG10 FC Aqua bk 23285


This datasheet of Ultramid® D3EG10 FC Aqua bk 23285 from BASF is provided by the international plastics database CAMPUS.

You may contact the supplier for more information about this grade.

This datasheet includes:

Ultramid® D3EG10 FC Aqua bk 23285 | PA*-GF50 | BASF
Product Texts
Ultramid® D3EG10 FC Aqua SCHWARZ 23285 is applicable for plastic parts, where the approvals of material for drinking water contact and direct food contact is a mandatory requirement.
The product is approved according to
· 21 CFR FDA § 177.1500 "Nylon resins". and the coloration complies with 21 CFR FDA § 178.3297 "Colorants for polymers. (for repeated use applications only) The finished article may not be used in contact with alcohol.
· European Food Contact European Food Contact Commission Regulation (EU) 10/2011
· GMP (EC) n°2023/2006
and has the approvals for drinking water regulations of
· KTW
· DVGW W270
· WRAS
· ACS (disclosure of ingredients)
· NSF (disclosure of ingredients)

For questions regarding the compliance with further regulations, and certificates, please contact your local BASF representative or Plastics Safety (E-Mail: plastics.safety@basf.com, Fax +49 621-60-93253).
Rheological propertiesdry / condUnitTest Standard
Molding shrinkage, parallel 0.2 / * % ISO 294-4, 2577
Molding shrinkage, normal 0.7 / * % ISO 294-4, 2577
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 16000 / 16000 MPa ISO 527-1/-2
Stress at break 245 / 210 MPa ISO 527-1/-2
Strain at break 2.5 / 2.5 % ISO 527-1/-2
Tensile creep modulus, 1h * / 14200 MPa ISO 899-1
Tensile creep modulus, 1000h * / 10300 MPa ISO 899-1
Charpy impact strength, +23°C 95 / 85 kJ/m² ISO 179/1eU
Charpy impact strength, -30°C 90 / - kJ/m² ISO 179/1eU
Charpy notched impact strength, +23°C 12 / 11 kJ/m² ISO 179/1eA
Charpy notched impact strength, -30°C 12 / - kJ/m² ISO 179/1eA
Thermal propertiesdry / condUnitTest Standard
Melting temperature, 10°C/min 250 / * °C ISO 11357-1/-3
Temp. of deflection under load, 1.80 MPa 225 / * °C ISO 75-1/-2
Coeff. of linear therm. expansion, parallel 14.7 / * E-6/K ISO 11359-1/-2
Other propertiesdry / condUnitTest Standard
Water absorption 3.5 / * % Sim. to ISO 62
Humidity absorption 1.3 / * % Sim. to ISO 62
Density 1580 / - kg/m³ ISO 1183
Material specific propertiesdry / condUnitTest Standard
Viscosity number 120 / * cm³/g ISO 307, 1157, 1628
Test specimen productionValueUnitTest Standard
Injection Molding, melt temperature 310 °C ISO 294
Injection Molding, mold temperature 100 °C ISO 10724
Injection Molding, injection velocity 200 mm/s ISO 294
Diagrams
Viscosity-shear rate, Ultramid® D3EG10 FC Aqua bk 23285, PA*-GF50, BASF
Shearstress-shear rate, Ultramid® D3EG10 FC Aqua bk 23285, PA*-GF50, BASF
Stress-strain (isochronous) 23°C, Ultramid® D3EG10 FC Aqua bk 23285, PA*-GF50, BASF
Creep modulus-time 23°C, Ultramid® D3EG10 FC Aqua bk 23285, PA*-GF50, BASF
Characteristics
Processing
Injection Molding
Regional Availability
Other text information
Injection molding
PREPROCESSING
Pre/Post-processing, max. allowed water content: .15 %
Pre/Post-processing, Pre-drying, Temperature: 110 °C
Pre/Post-processing, Pre-drying, Time: 8 h

PROCESSING
injection molding, Melt temperature, range: 280 - 310 °C
injection molding, Melt temperature, recommended: 300 °C
injection molding, Mold temperature, range: 80 - 120 °C
injection molding, Mold temperature, recommended: 100 °C
The data contained in this publication are based on our current
knowledge and experience. In view of the many factors that may affect
processing and application of our product, these data do not relieve
processors from carrying out their own investigations and tests. Any
descriptions, drawings, photographs, data, proportions, weights etc.
given herein may change without prior information and do not constitute
the agreed contractual quality of the product. It is the responsibility
of the recipient of our products to ensure that any proprietary rights
and existing laws and legislation are observed. NO WARRANTIES OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING
THEINTELLECTUAL PROPERTY RIGHTS OF OTHERS.

In order to check the availability of products please contact us or our
sales agency.


For more information about our products contact your local BASF
representative or

BASF SE
Dept. PM/K
Fax: 0621-60-49497
e-mail: e-mail

CAMPUS® is a registered trademark of CWFG (Chemie
Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt)

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2014