View list of

CAMPUS® datasheet | VESTAMID HTplus M1036


This datasheet of VESTAMID HTplus M1036 from Evonik Industries AG is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Mechanical properties - Thermal properties - Other properties
  VESTAMID® HTplus M1036 | PA66/6T-GF60 | Evonik Industries AG
Product Texts
VESTAMID® HTplus M1036

 

VESTAMID® HTplus M1036 is a glass-fiber reinforced (60%), heat-stabilized

polyphthalamide compound (PPA) for injection molding.

 

This compound is especially suitable for manufacting parts subjected to high

temperature.

 

VESTAMID® HTplus M1036 is supplied as cylindrical pellets in polyethylene

packaging.

 

For futher information, please contact our experts in the department Market

Development of the High Performance Polymers Business Line.

top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 23000 / - MPa ISO 527-1/-2
Stress at break 260 / - MPa ISO 527-1/-2
Strain at break 1.5 / - % ISO 527-1/-2
Charpy impact strength (+23°C) 60 / - kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) 40 / - kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 17 / - kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 17 / - kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 308 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 293 / * °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 305 / * °C ISO 75-1/-2
Vicat softening temperature (50°C/h 50N) 308 / * °C ISO 306
top
Other propertiesdry / condUnitTest Standard
Water absorption 3.2 / * % Sim. to ISO 62
Humidity absorption 0.2 / * % Sim. to ISO 62
Density 1770 / - kg/m³ ISO 1183
top
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Special Characteristics
Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding

Drying at 120°C for at least 4 hours before processing is recommended.

 

For futher information, please contact our experts in the department Market

Development of the High Performance Polymers Business Line.

top
Disclaimer
With the following data, which reflect our current knowledge and experience,
we wish to describe possible applications, however this information is given
without guarantee or assurance of the appropriate properties for a specific
application.

The processor is not relieved of the responsibility for incoming quality control
nor from his own testing and analysis.

All data concerning product safety (EG-guideline, BGVV, FDA) are of principle
nature and can be limitied regarding migration, temperature and type of food.
They reflect the status as of Feb. 29, 2012. To insure that this data reflects the
current state, please contact our Product Safety Department.

Should you have any questions, wishes or suggestions about CAMPUS,
please refer to the following address:

  Link to Evonik Industries AG homepage

In any case, we hope you enjoy working with CAMPUS!
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991