View list of

CAMPUS® datasheet | VESTAMID L1723 blk (sw)


This datasheet of VESTAMID L1723 blk (sw) from Evonik Industries AG is provided by the international plastics database CAMPUS.

CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.

You may contact the supplier for more information about this grade.

This datasheet includes:
Rheological properties - Mechanical properties - Thermal properties - Electrical properties - Other properties - Rheological calculation properties - Test specimen production - Diagrams
  VESTAMID® L1723 blk (sw) | PA12 | Evonik Industries AG
Product Texts
VESTAMID® L1723 blk


Resin:                ISO 1874-PA12-P, MHL, 16-005

 

UL recognition: UL 94:HB, BK, UL 746 B, RTI = 120/70/105°C

 

Low-viscosity, plasticized PA12 resin for injection moulding.


Application examples: strip clips, cable ties

top
Rheological propertiesdry / condUnitTest Standard
Melt volume-flow rate (MVR) 160 / * cm³/10min ISO 1133
Temperature 230 / * °C ISO 1133
Load 5 / * kg ISO 1133
Molding shrinkage (parallel) 1.6 / * % ISO 294-4, 2577
Molding shrinkage (normal) 1.5 / * % ISO 294-4, 2577
top
Mechanical propertiesdry / condUnitTest Standard
Tensile Modulus 480 / 450 MPa ISO 527-1/-2
Yield stress 30 / 28 MPa ISO 527-1/-2
Yield strain 27 / 26 % ISO 527-1/-2
Nominal strain at break >50 / >50 % ISO 527-1/-2
Tensile creep modulus (1h) * / 380 MPa ISO 899-1
Tensile creep modulus (1000h) * / 290 MPa ISO 899-1
Charpy impact strength (+23°C) N / N kJ/m² ISO 179/1eU
Charpy impact strength (-30°C) N / N kJ/m² ISO 179/1eU
Charpy notched impact strength (+23°C) 24 / 41 kJ/m² ISO 179/1eA
Charpy notched impact strength (-30°C) 5 / 5 kJ/m² ISO 179/1eA
top
Thermal propertiesdry / condUnitTest Standard
Melting temperature (10°C/min) 173 / * °C ISO 11357-1/-3
Temp. of deflection under load (1.80 MPa) 45 / * °C ISO 75-1/-2
Temp. of deflection under load (0.45 MPa) 95 / * °C ISO 75-1/-2
Vicat softening temperature (50°C/h 50N) 130 / * °C ISO 306
Coeff. of linear therm. expansion (parallel) 180 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion (normal) 180 / * E-6/K ISO 11359-1/-2
Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.6 / * mm IEC 60695-11-10
UL recognition UL / * - -
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 3.2 / * mm IEC 60695-11-10
UL recognition UL / * - -
top
Electrical propertiesdry / condUnitTest Standard
Relative permittivity (100Hz) 10 / 14 - IEC 60250
Relative permittivity (1MHz) 3.7 / 4.7 - IEC 60250
Dissipation factor (100Hz) 1600 / 1400 E-4 IEC 60250
Dissipation factor (1MHz) 1200 / 1700 E-4 IEC 60250
Volume resistivity 1E10 / 4E9 Ohm*m IEC 60093
Surface resistivity * / 2E13 Ohm IEC 60093
Electric strength 33 / 31 kV/mm IEC 60243-1
Comparative tracking index 600 / 600 - IEC 60112
top
Other propertiesdry / condUnitTest Standard
Humidity absorption 0.5 / * % Sim. to ISO 62
Density 1030 / 1040 kg/m³ ISO 1183
top
Rheological calculation propertiesValueUnitTest Standard
Density of melt 860 kg/m³ -
Spec. heat capacity melt 3000 J/(kg K) -
Ejection temperature 170 °C -
top
Test specimen productionValueUnitTest Standard
Injection Molding, melt temperature 210 °C ISO 294
Injection Molding, mold temperature 80 °C ISO 10724
Injection Molding, injection velocity 200 mm/s ISO 294
Injection Molding, pressure at hold 70 MPa ISO 294
top
Diagrams
Viscosity-shear rate , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Shearstress-shear rate , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Dynamic Shear modulus-temperature , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Stress-strain , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Secant modulus-strain , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Stress-strain (isochronous) 23°C, VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Creep modulus-time 23°C, VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Specific volume-temperature (pvT) , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
Tensile modulus-temperature , VESTAMID® L1723 blk (sw), PA12, Evonik Degussa
top
Characteristics
Processing
Injection Molding
Delivery form
Pellets
Additives
Lubricants, Release agent, Plasticizer
Special Characteristics
Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heat
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa
top
Other text information
Injection molding

PREPROCESSING INFORMATION
Maximum Water Content: 0.1 %
When the indicated water content is exceeded, the resin must be dried. The drying time is dependent

on the drying temperature. At a drying temperature of 80°C we recommend, depending on the water

content, a drying time of 8 - 16 hours. Fresh air dryers are acceptable, better would be a dry air or

vacuum dryer. Please note our product literature, plasticized resins can lose plasticizer during drying.


PROCESSING INFORMATION

Melt Temperature:190 - 230°C
Mold Temperature:30 - 100°C
top
Chemical Media Resistance
Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)
Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)
Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)
Ketones
Acetone (23°C)
Ethers
Diethyl ether (23°C)
Mineral oils
SAE 10W40 multigrade motor oil (23°C)
Insulating Oil (23°C)
Standard Fuels
ISO 1817 Liquid 1 (60°C)
ISO 1817 Liquid 2 (60°C)
ISO 1817 Liquid 3 (60°C)
ISO 1817 Liquid 4 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
ISO 1817 Liquid 2 (85°C)
Diesel EN 590 (85°C)
Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)
Other
Ethyl Acetate (23°C)
Hydrogen peroxide (23°C)
DOT No. 4 Brake fluid (120°C)
Water (23°C)
top
Disclaimer
With the following data, which reflect our current knowledge and experience,
we wish to describe possible applications, however this information is given
without guarantee or assurance of the appropriate properties for a specific
application.

The processor is not relieved of the responsibility for incoming quality control
nor from his own testing and analysis.

All data concerning product safety (EG-guideline, BGVV, FDA) are of principle
nature and can be limitied regarding migration, temperature and type of food.
They reflect the status as of Feb. 29, 2012. To insure that this data reflects the
current state, please contact our Product Safety Department.

Should you have any questions, wishes or suggestions about CAMPUS,
please refer to the following address:

  Link to Evonik Industries AG homepage

In any case, we hope you enjoy working with CAMPUS!
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991