- All Evonik Degussa grades
- All PA612 grades
- All grades beginning with V
FREE DOWNLOAD
Interested inGraphical Display of Values (Scatter Plot, Polar Chart)?
The CAMPUS desktop version
offers extended functionality!CAMPUS® datasheet | VESTAMID X7099 blk (sw)
This datasheet of VESTAMID X7099 blk (sw) from Evonik Industries AG is provided by the international plastics database CAMPUS.
CAMPUS is organized by a group of leading international resin producers, who have agreed to test their material according to uniform conditions, based on ISO standards (ISO 10350, ISO 11403), in order to offer comparable data to the market.
Resin: ISO 1874-PA612,MH,14-060,GF20
VESTAMID® X7099 is a PA 612 resin especially developed for the production of plastic-rubber
composites according to the Evonik Industries K&K Process patent.
Parts made from VESTAMID® X7099 can be, without the use of adhesives or adhesion promoters,
covulcanized with rubbers, such as XNBR, HNBR, AEM or FPM.
As a partially crystalline resin VESTAMID® X7099 exhibits an outstanding chemical resistance,
especially against fuels, oils and fats.
In comparison to resins based on PA 66 or PA 6 VESTAMID® X7099 has a distinctly lower water
absorption.
| Rheological properties | dry / cond | Unit | Test Standard |
| Melt volume-flow rate (MVR) | 10 / * | cm³/10min | ISO 1133 |
| Temperature | 275 / * | °C | ISO 1133 |
| Load | 5 / * | kg | ISO 1133 |
| Molding shrinkage (parallel) | 0.6 / * | % | ISO 294-4, 2577 |
| Molding shrinkage (normal) | 1.1 / * | % | ISO 294-4, 2577 |
| Mechanical properties | dry / cond | Unit | Test Standard |
| Tensile Modulus | 5600 / - | MPa | ISO 527-1/-2 |
| Stress at break | 118 / - | MPa | ISO 527-1/-2 |
| Strain at break | 5 / - | % | ISO 527-1/-2 |
| Charpy impact strength (+23°C) | 80 / - | kJ/m² | ISO 179/1eU |
| Charpy impact strength (-30°C) | 60 / - | kJ/m² | ISO 179/1eU |
| Charpy notched impact strength (+23°C) | 10 / - | kJ/m² | ISO 179/1eA |
| Charpy notched impact strength (-30°C) | 7 / - | kJ/m² | ISO 179/1eA |
| Thermal properties | dry / cond | Unit | Test Standard |
| Melting temperature (10°C/min) | 215 / * | °C | ISO 11357-1/-3 |
| Temp. of deflection under load (1.80 MPa) | 190 / * | °C | ISO 75-1/-2 |
| Temp. of deflection under load (0.45 MPa) | 210 / * | °C | ISO 75-1/-2 |
| Vicat softening temperature (50°C/h 50N) | 205 / * | °C | ISO 306 |
| Burning Behav. at 1.5 mm nom. thickn. | HB / * | class | IEC 60695-11-10 |
| Thickness tested | 1.6 / * | mm | IEC 60695-11-10 |
| Burning Behav. at thickness h | HB / * | class | IEC 60695-11-10 |
| Thickness tested | 3.2 / * | mm | IEC 60695-11-10 |
| Electrical properties | dry / cond | Unit | Test Standard |
| Relative permittivity (100Hz) | 4.4 / - | - | IEC 60250 |
| Relative permittivity (1MHz) | 3.9 / - | - | IEC 60250 |
| Dissipation factor (100Hz) | 650 / - | E-4 | IEC 60250 |
| Dissipation factor (1MHz) | 430 / - | E-4 | IEC 60250 |
| Volume resistivity | 1E12 / - | Ohm*m | IEC 60093 |
| Electric strength | 38 / - | kV/mm | IEC 60243-1 |
| Other properties | dry / cond | Unit | Test Standard |
| Water absorption | 2 / * | % | Sim. to ISO 62 |
| Humidity absorption | 0.8 / * | % | Sim. to ISO 62 |
| Density | 1200 / 1200 | kg/m³ | ISO 1183 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Density of melt | 1050 | kg/m³ | - |
| Thermal conductivity of melt | 0.2 | W/(m K) | - |
| Spec. heat capacity melt | 2590 | J/(kg K) | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection Molding, melt temperature | 270 | °C | ISO 294 |
| Injection Molding, mold temperature | 80 | °C | ISO 10724 |
| Injection Molding, injection velocity | 200 | mm/s | ISO 294 |
| Injection Molding, pressure at hold | 70 | MPa | ISO 294 |
PREPROCESSING INFORMATION
Maximum Water Content: 0.1 %
When the indicated water content is exceeded, the resin must be dried. The drying time is dependent
on the drying temperature. At a drying temperature of 80 °C we recommend, depending on the water
content, a drying time of 8 - 16 hours. Fresh air dryers are acceptable, better would be a dry air or
vacuum dryer. Please note our product literature, plasticized resins can lose plasticizer during drying.
PROCESSING INFORMATION
Melt Temperature : 230 - 270 °C
Mold Temperature : 50 - 100 °C
With the following data, which reflect our current knowledge and experience, we wish to describe possible applications, however this information is given without guarantee or assurance of the appropriate properties for a specific application. The processor is not relieved of the responsibility for incoming quality control nor from his own testing and analysis. All data concerning product safety (EG-guideline, BGVV, FDA) are of principle nature and can be limitied regarding migration, temperature and type of food. They reflect the status as of Feb. 29, 2012. To insure that this data reflects the current state, please contact our Product Safety Department. Should you have any questions, wishes or suggestions about CAMPUS, please refer to the following address: Link to Evonik Industries AG homepage In any case, we hope you enjoy working with CAMPUS!
CAMPUS® is a Registered trademark of CWFG mbH, Frankfurt/Main, 1991