View list of
View Datasheet in other language
CAMPUS® datasheet | Ultramid® 8266G HS BK102
This datasheet of Ultramid® 8266G HS BK102 from BASF is provided by the international plastics database CAMPUS.
You may contact the supplier for more information about this grade.
Ultramid® 8266G HS BK102 | PA6-(MD+GF)40 | BASF
Texto del producto
Ultramid® 8266G HS is a heat stabilized, 40% mineral and glass, injection molding compound. It possesses a balance of engineering properties in combination with excellent dimensional stability, low warp and resistance to sink-mark formation. It is also available in non-heat stabilized (Ultramid® 8266G) and/or pigmented versions.
Ultramid® 8266G HS is generally recommended for high performance applications such as painted automotive housings and exterior body parts, brackets, wheel hubs, shrouds, roller bearings, and push-pull cable components.
Ultramid® 8266G HS is generally recommended for high performance applications such as painted automotive housings and exterior body parts, brackets, wheel hubs, shrouds, roller bearings, and push-pull cable components.
| Propiedades mecánicas | Seco / Cond | Unidades | Método de ensayo |
| Módulo de tracción | 9780 / 5610 | MPa | ISO 527-1/-2 |
| Resistencia a la tracción | 125 / 70 | MPa | ISO 527-1/-2 |
| Alargamiento a rotura | 3 / 6 | % | ISO 527-1/-2 |
| Res. impacto Charpy c/entalla, +23°C | 4 / - | kJ/m² | ISO 179/1eA |
| Propiedades térmicas | Seco / Cond | Unidades | Método de ensayo |
| Temperatura de fusión, 10°C/min | 220 / * | °C | ISO 11357-1/-3 |
| Estabilidad al calor, 1.80 MPa | 205 / * | °C | ISO 75-1/-2 |
| Estabilidad al calor, 0.45 MPa | 217 / * | °C | ISO 75-1/-2 |
| Coef.de expansión térmica lineal, paralelo | 21 / * | E-6/K | ISO 11359-1/-2 |
| Coef.de expansión térmica lineal, normal | 58 / * | E-6/K | ISO 11359-1/-2 |
| Combustibilidad a espesor h | HB / * | class | IEC 60695-11-10 |
| Espesores de probeta | 3.0 / * | mm | IEC 60695-11-10 |
| Valoración UL | UL / * | - | - |
| Propiedades eléctricas | Seco / Cond | Unidades | Método de ensayo |
| Resistividad volumétrica específica | >1E13 / - | Ohm*m | IEC 60093 |
| Otras propiedades | Seco / Cond | Unidades | Método de ensayo |
| Absorción de agua | 5.7 / * | % | Sim. to ISO 62 |
| Absorción de humedad | 1.6 / * | % | Sim. to ISO 62 |
| Densidad | 1480 / * | kg/m³ | ISO 1183 |
| Condiciones de transformación | Valor | Unidades | Método de ensayo |
| Moldeo por inyección, temperatura de la masa | 275 | °C | ISO 294 |
| Moldeo por inyección, temperatura del molde | 95 | °C | ISO 10724 |
Funciones
Características
Procesamiento y forma de entrega
Moldeo por inyección
Forma de suministro
Sémola
Características especiales
Estable contra el calor
Disponibilidad regional
Norteamérica
Aviso
The data contained in this publication are based on our current
knowledge and experience. In view of the many factors that may affect
processing and application of our product, these data do not relieve
processors from carrying out their own investigations and tests. Any
descriptions, drawings, photographs, data, proportions, weights etc.
given herein may change without prior information and do not constitute
the agreed contractual quality of the product. It is the responsibility
of the recipient of our products to ensure that any proprietary rights
and existing laws and legislation are observed. NO WARRANTIES OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING
THEINTELLECTUAL PROPERTY RIGHTS OF OTHERS.
In order to check the availability of products please contact us or our
sales agency.
For more information about our products contact your local BASF
representative or
BASF SE
Dept. PM/K
Fax: 0621-60-49497
e-mail: e-mail
CAMPUS® is a registered trademark of CWFG (Chemie
Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt)
knowledge and experience. In view of the many factors that may affect
processing and application of our product, these data do not relieve
processors from carrying out their own investigations and tests. Any
descriptions, drawings, photographs, data, proportions, weights etc.
given herein may change without prior information and do not constitute
the agreed contractual quality of the product. It is the responsibility
of the recipient of our products to ensure that any proprietary rights
and existing laws and legislation are observed. NO WARRANTIES OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OFMERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS
DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE
PRODUCTS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING
THEINTELLECTUAL PROPERTY RIGHTS OF OTHERS.
In order to check the availability of products please contact us or our
sales agency.
For more information about our products contact your local BASF
representative or
BASF SE
Dept. PM/K
Fax: 0621-60-49497
e-mail: e-mail
CAMPUS® is a registered trademark of CWFG (Chemie
Wirtschaftsfoerderungsgesellschaft GmbH, Frankfurt)
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012