View list of
CAMPUS® datasheet | Durethan® DP BC 600 HTS
This datasheet of Durethan® DP BC 600 HTS from LANXESS Deutschland GmbH is provided by the international plastics database CAMPUS.
Durethan® DP BC 600 HTS | PA6 | LANXESS Deutschland GmbH
Informations produit
PA 6, non-reinforced, extrusion, Blasform, impact modified, heat-ageing stabilized
| Propriétés rhéologiques | sec / cond | Unité | Norme du test |
| Retrait au moulage, parallèle | 1.7 / * | % | ISO 294-4, 2577 |
| Retrait au moulage, perpendiculaire | 1.4 / * | % | ISO 294-4, 2577 |
| Propriétés mécaniques | sec / cond | Unité | Norme du test |
| Module en traction | 1300 / 350 | MPa | ISO 527-1/-2 |
| Contrainte d'écoulement | 39 / 29 | MPa | ISO 527-1/-2 |
| Déformation au seuil d'écoulement | 6.3 / 50 | % | ISO 527-1/-2 |
| Résistance au choc Charpy, +23°C | N / N | kJ/m² | ISO 179/1eU |
| Résistance au choc Charpy, -30°C | N / N | kJ/m² | ISO 179/1eU |
| Résistance au choc Charpy (entaillé), +23°C | 100 / 110 | kJ/m² | ISO 179/1eA |
| Résistance au choc Charpy (entaillé), -30°C | 70 / 60 | kJ/m² | ISO 179/1eA |
| Propriétés thermiques | sec / cond | Unité | Norme du test |
| Température de fusion, 10°C/min | 219 / * | °C | ISO 11357-1/-3 |
| Température de fléchissement s/chrg, 1.80 MPa | 55 / * | °C | ISO 75-1/-2 |
| Propriétés diverses | sec / cond | Unité | Norme du test |
| Masse volumique | 1040 / - | kg/m³ | ISO 1183 |
Caractéristiques
Transformation
Extrusion (autres), Soufflage
Disponibilité régionale
Conditions générales
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery. The values stored in the databank should only be used as guidelines for component design. In giving these values neither guarantee, nor assurance of particular material properties can be given. techcenter.lanxess.com
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012











