View list of
  • All DuPont grades
  • All PBT grades
  • All grades beginning with C

CAMPUS® datasheet | Crastin® S600F40 NC010


This datasheet of Crastin® S600F40 NC010 from DuPont Engineering Polymers is provided by the international plastics database CAMPUS.

This datasheet includes:

  Crastin® S600F40 NC010 | PBT | DuPont Engineering Polymers
Testo del prodotto
Common features of Crastin® thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin® thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL recognition (class V-0). Crastin® thermoplastic polyester resin typically has high chemical a nd heat ageing resistance.

 

The good melt stability of Crastin® thermoplastic polyester resin normally enables the recycling of properly handled production waste.

If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.

 

Crastin® thermoplastic polyester resin typically is used in demanding applications in the electronics, electrical, automotive, mechanical engineering, chemical, domestic appliances and sporting goods industry.

 

Crastin® S600F40 is an unreinforced, lubricated, low viscosity polybutylene terephtalate for injection molding.

Food compliance:

Specific statement for EU available

 

Applications: bezels

Proprietà ReologicheValoreUnitáNorma del test
Indice di fusione di volume, MVR 32 cm³/10min ISO 1133
Temperatura 250 °C ISO 1133
Carico 2.16 kg ISO 1133
Ritiro di stampaggio, parallelo 1.9 % ISO 294-4, 2577
Ritiro di stampaggio, perpendicolare 1.8 % ISO 294-4, 2577
Proprietà MeccanicheValoreUnitáNorma del test
Modulo a trazione 2600 MPa ISO 527-1/-2
Carico unitario a trazione 58 MPa ISO 527-1/-2
Deformazione a snervamento 4 % ISO 527-1/-2
Deformazione nominale a rottura 30 % ISO 527-1/-2
Modulo di scorrimento a trazione, 1h 2500 MPa ISO 899-1
Modulo di scorrimento a trazione, 1000h 1800 MPa ISO 899-1
Resistenza all'urto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistenza all'urto Charpy, -30°C N kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 4 kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 4 kJ/m² ISO 179/1eA
Proprietà TermicheValoreUnitáNorma del test
Temperatura di fusione, 10°C/min 225 °C ISO 11357-1/-3
Temperatura di transizione vetrosa, 10°C/min 55 °C ISO 11357-1/-2
Temp.di inflessione sotto carico, 1.80 MPa 50 °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 115 °C ISO 75-1/-2
Temp.di rammollimento Vicat, 50°C/h 50N 175 °C ISO 306
Coeff.di dilatazione termica lin., parallelo 130 E-6/K ISO 11359-1/-2
Coeff.di dilatazione termica lin., perpend. 130 E-6/K ISO 11359-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB class IEC 60695-11-10
Spessore provato 1.5 mm IEC 60695-11-10
Omologazione UL UL - -
Reazione al fuoco a spessore h HB class IEC 60695-11-10
Spessore provato 0.8 mm IEC 60695-11-10
Omologazione UL UL - -
Indice di ossigeno 22 % ISO 4589-1/-2
Proprietà ElettricheValoreUnitáNorma del test
Costante dielettrica relativa, 1MHz 3.2 - IEC 60250
Fattore di dissipazione, 100Hz 20 E-4 IEC 60250
Fattore di dissipazione, 1MHz 200 E-4 IEC 60250
Resistività volumica >1E13 Ohm*m IEC 60093
Resistività superficiale 1E12 Ohm IEC 60093
Rigidità dielettrica 26 kV/mm IEC 60243-1
Res. Alle correnti striscianti superficiali 600 - IEC 60112
Altre ProprietàValoreUnitáNorma del test
Assorbimento d'acqua 0.4 % Sim. alla ISO 62
Assorbimento d'umidità 0.2 % Sim. alla ISO 62
Massa volumica 1310 kg/m³ ISO 1183
Proprietà Specifiche MaterialeValoreUnitáNorma del test
Numero di viscosità 120 cm³/g ISO 307, 1157, 1628
Proprietà reologiche per la simulazioneValoreUnitáNorma del test
Densità del fuso 1110 kg/m³ -
Conduttività termica del fuso 0.21 W/(m K) -
Capacità termica specifica del fuso 2110 J/(kg K) -
Temperatura di estrazione 165 °C -
Funzioni
Viscosità-Velocità di taglio , Crastin® S600F40 NC010, PBT, DuPont
Sforzo di taglio-Velocità di taglio , Crastin® S600F40 NC010, PBT, DuPont
Sforzi-deformazione , Crastin® S600F40 NC010, PBT, DuPont
Modulo secante-deformazione , Crastin® S600F40 NC010, PBT, DuPont
LTHA-Carico unitario a rottura 4mm, Crastin® S600F40 NC010, PBT, DuPont
LTHA-Resistenza all'urto Charpy (23°C) 4mm, Crastin® S600F40 NC010, PBT, DuPont
LTHA-Rigidità dielettrica 1mm, Crastin® S600F40 NC010, PBT, DuPont
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Pellet
Additivi
Agente di distacco
Disponibilità geografica
Resistenza chimica
Acidi
Acido acetico (5% da massa) (23°C)
Soluzione acida citrica (10% da massa) (23°C)
Acido lattico (10% da massa) (23°C)
Acido cloridrico (36% da massa) (23°C)
Acido nitrico (40% da massa) (23°C)
Acido solforico (38% da massa) (23°C)
Acido solforico (5% da massa) (23°C)
Soluzione acida cromica (40% da massa) (23°C)
Basi
Soluzione dell' idrossido del sodio (35% da massa) (23°C)
Soluzione dell' idrossido del sodio (1% da massa) (23°C)
Soluzione dell' idrossido di ammonio (10% da massa) (23°C)
Alcool
Alcool di isopropile (23°C)
Metanolo (23°C)
Etanolo (23°C)
Idrocarburi
n-Hexane (23°C)
Toluene (23°C)
isoottano (23°C)
Chetoni
Acetone (23°C)
Eteri
Etere Etilico (23°C)
Oli minerali
Olio multigrade del motore di SAE 10W40 (23°C)
Olio multigrade del motore di SAE 10W40 (130°C)
Olio dell' ipoide-ingranaggio di SAE 80/90 (130°C)
Olio isolante (23°C)
Combustibili Standard
Liquido 1 di ISO 1817 (60°C)
Liquido 2 di ISO 1817 (60°C)
Liquido 3 di ISO 1817 (60°C)
Liquido 4 di ISO 1817 (60°C)
Combust. stand. senza alcool (pref. ISO 1817 liquido C) (23°C)
Combust. stand. con alcool (pref. ISO 1817 liquido 4) (23°C)
Combustibile diesel (pref. ISO 1817 liquido F) (23°C)
Combustibile diesel (pref. ISO 1817 liquido F) (90°C)
Combustibile diesel (pref. ISO 1817 liquido F) (>90°C)
Soluzioni saline
Soluzione del cloruro di sodio (10% da massa) (23°C)
Soluzione dell' ipoclorito del sodio (10% da massa) (23°C)
Soluzione del carbonato di sodio (20% da massa) (23°C)
Soluzione del carbonato di sodio (2% da massa) (23°C)
Soluzione del cloruro dello zinco (50% da massa) (23°C)
Altri
Acetato etilico (23°C)
Perossido di idrogeno (23°C)
Liquido di freno del DOT N° 4 (130°C)
Glicol etilenico (50% da massa) in acqua (108°C)
etanolo di nonylphenoxy-polyethyleneoxy 1% in acqua (23°C)
acido oleico 50% + olio di oliva 50% (23°C)
Acqua (23°C)
Acqua deionizzata (90°C)
Soluzione del fenolo (5% da massa) (23°C)
Disclaimer
All data provided according to ISO 10350 for single points and ISO 11403 for multipoints.

Contact DuPont for Material Safety Data Sheet, general guides and/or additional information about ventilation, handling, purging, drying, etc.
Test temperatures are 23°C unless otherwise stated.

The DuPont Oval Logo, DuPont™, The miracles of science™ and ® are trademarks or registered trademarks of DuPont Company.
Copyright© 2011 E.I. du Pont de Nemours and Company. All Rights Reserved.

The information provided in this data sheet corresponds to our knowledge on the subject at the date of its publication.
This information may be subject to revision as new knowledge and experience becomes available.
The data provided fall within the normal range of product properties and relate only to the specific material designated; these data may not be
valid for such material used in combination with any other materials, additives or pigments or in any process, unless expressly indicated otherwise.
The data provided should not be used to establish specification limits or used alone as the basis of design; they are not intended to substitute
for any testing you may need to conduct to determine for yourself the suitability of a specific material for your particular purposes.
Since DuPont cannot anticipate all variations in actual end-use conditions DuPont makes no warranties and assumes no liability in connection
with any use of this information.
Nothing in this publication is to be considered as a license to operate under or a recommendation to infringe any patent rights.
DuPont advises you to seek independent counsel for a freedom to practice opinion on the intended application or end-use of our products.

CAUTION: DO NOT USE DUPONT MATERIALS IN MEDICAL APPLICATIONS INVOLVING IMPLANTATION IN THE HUMAN BODY OR
CONTACT WITH INTERNAL BODY FLUIDS OR TISSUES UNLESS THE MATERIAL HAS BEEN PROVIDED FROM DUPONT UNDER A
WRITTEN CONTRACT THAT IS CONSISTENT WITH DUPONT POLICY REGARDING MEDICAL APPLICATIONS AND EXPRESSLY
ACKNOWLEDGES THE CONTEMPLATED USE.

For further information, please contact your DuPont representative. You may also request a copy of DuPont POLICY Regarding Medical
Applications... H-50103-3 and DuPont CAUTION Regarding Medical Applications... H-50102-3.

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012