View list of
- All A. Schulman grades
- All PA6 grades
- All grades beginning with S
CAMPUS® datasheet | SCHULAMID® 6 GB 30
This datasheet of SCHULAMID® 6 GB 30 from A. Schulman GmbH is provided by the international plastics database CAMPUS.
You may contact the supplier for more information about this grade.
SCHULAMID® 6 GB 30 | PA6-GB30 | A. Schulman GmbH
Testo del prodotto
30% glass bead reinforced PA 6 with increased stiffness and dimensional stability
| Proprietà Meccaniche | secco/cond | Unitá | Norma del test |
| Modulo a trazione | 4500 / 1800 | MPa | ISO 527-1/-2 |
| Carico unitario a rottura | 80 / 50 | MPa | ISO 527-1/-2 |
| Deformazione a rottura | 8 / 12 | % | ISO 527-1/-2 |
| Resistenza all'urto Charpy, +23°C | 30 / 45 | kJ/m² | ISO 179/1eU |
| Resistenza all'urto Charpy, -30°C | 28 / 35 | kJ/m² | ISO 179/1eU |
| Resist. urto Charpy con intaglio, +23°C | 6 / 14 | kJ/m² | ISO 179/1eA |
| Resist. urto Charpy con intaglio, -30°C | 4 / 4 | kJ/m² | ISO 179/1eA |
| Proprietà Termiche | secco/cond | Unitá | Norma del test |
| Temperatura di fusione, 10°C/min | 221 / * | °C | ISO 11357-1/-3 |
| Temperatura di transizione vetrosa, 10°C/min | 42 / * | °C | ISO 11357-1/-2 |
| Temp.di inflessione sotto carico, 1.80 MPa | 70 / * | °C | ISO 75-1/-2 |
| Temp.di inflessione sotto carico, 0.45 MPa | 180 / * | °C | ISO 75-1/-2 |
| Temp.di rammollimento Vicat, 50°C/h 50N | 200 / * | °C | ISO 306 |
| Reaz. al fuoco spess.nom. 1.5mm | HB / * | class | IEC 60695-11-10 |
| Spessore provato | 1.5 / * | mm | IEC 60695-11-10 |
| Omologazione UL | UL / * | - | - |
| Proprietà Elettriche | secco/cond | Unitá | Norma del test |
| Costante dielettrica relativa, 100Hz | 4 / 4 | - | IEC 60250 |
| Costante dielettrica relativa, 1MHz | 4 / 4 | - | IEC 60250 |
| Fattore di dissipazione, 100Hz | 0.005 / 0.005 | E-4 | IEC 60250 |
| Fattore di dissipazione, 1MHz | 0.016 / 0.016 | E-4 | IEC 60250 |
| Resistività volumica | >1E13 / 1E10 | Ohm*m | IEC 60093 |
| Resistività superficiale | * / >1E15 | Ohm | IEC 60093 |
| Res. Alle correnti striscianti superficiali | - / 450 | - | IEC 60112 |
| Altre Proprietà | secco/cond | Unitá | Norma del test |
| Assorbimento d'umidità | 2.2 / * | % | Sim. alla ISO 62 |
| Massa volumica | 1360 / - | kg/m³ | ISO 1183 |
| Proprietà Specifiche Materiale | secco/cond | Unitá | Norma del test |
| Numero di viscosità | 145 / * | cm³/g | ISO 307, 1157, 1628 |
| Proprietà reologiche per la simulazione | Valore | Unitá | Norma del test |
| Densità del fuso | 1250 | kg/m³ | - |
| Conduttività termica del fuso | 0.25 | W/(m K) | - |
| Diffusività termica | 8E-8 | m²/s | - |
| Temperatura di estrazione | 110 | °C | - |
| Preparazione Provette | Valore | Unitá | Norma del test |
| Parametri di stampaggio in acc. ISO | 1870 | - | ISO ....-2 |
| Stamp. ad Iniezione, temp. di fusione | 250 | °C | ISO 294 |
| Stamp. ad Iniezione, temperatura dello stampo | 80 | °C | ISO 10724 |
| Stamp. ad Iniezione, velocità media d'iniezione | 250 | mm/s | ISO 294 |
| Stamp. ad Iniezione, pressione di chiusura | 70 | MPa | ISO 294 |
Funzioni
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Forma fisica disponibile
Granuli
Additivi
Agente di distacco
Disponibilità geografica
Disclaimer
The information and recommendations contained in this document are based upon
data collected by A. Schulman and are believed to be reliable; however, because
A. Schulman cannot anticipate or control the many different conditions under
which this information and/or product may be used, no representation is made
and no warranty is given of any kind, express or implied, for completeness,
accuracy, availability, suitability, usefulness, commercial value, or non-violation
of intellectual property rights of information, recommendations, and products
and services directly or indirectly provided. A. Schulman assumes no responsibility
for the results of the use of products and processes described herein and expressly
disclaims the implied warranties of merchantability and fitness for a particular use
If there are questions to given information, to further properties or further A. Schulman
products please contact
A. Schulman GmbH
Huettenstrasse 211
50170 Kerpen
Tel: 02273 / 561-0
Contact: aschulman@de.aschulman.com
Subject: Material data
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012











