View list of
  • All Rhodia grades
  • All PA66 grades
  • All grades beginning with T

CAMPUS® datasheet | Technyl® A 221 Natural FA


This datasheet of Technyl® A 221 Natural FA from Rhodia Polyamide Engineering Plastics is provided by the international plastics database CAMPUS.

This datasheet includes:
Proprietà Meccaniche - Proprietà Termiche - Altre Proprietà - Preparazione Provette
  Technyl® A 221 Natural FA | PA66 | Rhodia Polyamide Engineering Plastics
Testo del prodotto
 Unreinforced polyamide 66, medium viscosity, for injection moulding, with a special crystallizing agent, for fast cycles.

Suitable for food contact applications

 

TECHNYL® A 221 NATURAL FA offers a good combination between primary properties of the unreinforced polyamide 66 and processing properties leading to increased productivity. These performances are associated with excellent dimensional stability and good rigidity of moulded parts. This grade is used in a wide variety of industries:

 

- Automotive: connectors

- Electrical: connectors, rotary switches

- Consumer goods: lighters, aerosol valves.

 

This product is available in natural.

top
Proprietà Meccanichesecco/condUnitáNorma del test
Modulo a trazione 3200 / - MPa ISO 527-1/-2
Carico unitario a rottura 95 / - MPa ISO 527-1/-2
Deformazione a rottura 20 / - % ISO 527-1/-2
Resistenza all'urto Charpy, +23°C N / * kJ/m² ISO 179/1eU
Resist. urto Charpy con intaglio, +23°C 2.5 / * kJ/m² ISO 179/1eA
Resist. urto Charpy con intaglio, -30°C 2 / * kJ/m² ISO 179/1eA
top
Proprietà Termichesecco/condUnitáNorma del test
Temperatura di fusione, 10°C/min 263 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 80 / * °C ISO 75-1/-2
Coeff.di dilatazione termica lin., perpend. 65 / * E-6/K ISO 11359-1/-2
top
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'acqua 1.1 / * % Sim. alla ISO 62
Massa volumica 1140 / - kg/m³ ISO 1183
top
Preparazione ProvetteValoreUnitáNorma del test
Stamp. ad Iniezione, temperatura dello stampo 80 °C ISO 10724
top
Caratteristiche
Processabilità e Forma di Forni
Stampaggio ad Iniezione
Disponibilità geografica
Nord America, Europa
top
Disclaimer
WARRANTY

 This information is supplied to assist you in your choice of the
 material best suited to your requirements and does not in any way
 constitute a product specification.

 The values given relate to unpigmented materials (natural colour).
 Pigmentation can alter results. The characteristics supplied are
 typical values. Our specialists are available to advise you on the
 values to be used in order to carry out calculations correctly on
 part dimensions.

 The information contained in this document is supplied in good
 faith. However it is given purely as an indication. It shall not be
 considered in any way as a formal commitment or warranty on our part,
 notably in respect of the eventual infringement of any rights of
 third parties who may use our products. We remain at your entire
 disposal to provide you with any information that you might require.
top

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012