View list of
  • All LANXESS grades
  • All PA6 grades
  • All grades beginning with D

CAMPUS® datasheet | Durethan® BKV 30 G W1


This datasheet of Durethan® BKV 30 G W1 from LANXESS Deutschland GmbH is provided by the international plastics database CAMPUS.

This datasheet includes:

  Durethan® BKV 30 G W1 | PA6-GF30 | LANXESS Deutschland GmbH
商品の説明文
PA 6, 30 % glass fibres, injection moulding, weather stabilized
レオロジー特性乾燥/調湿単位テスト基準
成形収縮率, 平行 0.2 / * % ISO 294-4, 2577
成形収縮率, 直角 0.6 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
引張弾性率 9900 / 6600 MPa ISO 527-1/-2
破壊応力 180 / 106 MPa ISO 527-1/-2
破壊ひずみ 2.7 / 6.1 % ISO 527-1/-2
シャルピー衝撃強さ, +23°C 60 / 65 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C 50 / 40 kJ/m² ISO 179/1eU
パンクチャー衝撃-最大応力, +23°C 840 / - N ISO 6603-2
パンクチャー衝撃-最大応力, -30°C 740 / - N ISO 6603-2
パンクチャー衝撃エネルギー, +23°C 3 / - J ISO 6603-2
パンクチャー衝撃エネルギー, -30゚C 2 / 2 J ISO 6603-2
熱的特性乾燥/調湿単位テスト基準
溶融温度, 10°C/min 219 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 200 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 215 / * °C ISO 75-1/-2
線膨張係数, 平行 30 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 80 / * E-6/K ISO 11359-1/-2
電気的特性.乾燥/調湿単位テスト基準
耐トラッキング性 500 / - - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
吸水率 6.4 / * % Sim. to ISO 62
吸湿率 2 / * % Sim. to ISO 62
密度 1370 / - kg/m³ ISO 1183
材料特有の特性乾燥/調湿単位テスト基準
粘度数 140 / * cm³/g ISO 307, 1157, 1628
流動解析用データ単位テスト基準
溶融時の密度 1160 kg/m³ -
溶融時の熱伝導率 0.223 W/(m K) -
溶融時の比熱 2140 J/(kg K) -
熱拡散率 9.03E-8 m²/s -
突き出し時の時の温度 140 °C -
試験片の成形条件.単位テスト基準
射出成形, 樹脂温度 280 °C ISO 294
射出成形, 金型温度 80 °C ISO 10724
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット.
特殊な特性.
紫外線安定化.
領域別の利用可能性
Disclaimer
This information and our  technical advice - whether verbal, in  writing
or by way of trials - are  given in good faith but without warranty, and
this  also  applies  where  proprietary  rights  of  third  parties  are
involved.  Our advice does not release you from  the obligation to check
its validity and to test our  products  as to their  suitability for the
intended processes and uses.  The  application, use  and  processing  of
our products and the products manufactured  by  you  on the basis of our
technical  advice  are  beyond our control and, therefore, entirely your
own  responsibility.  Our  products  are  sold  in  accordance  with our
General  Conditions of Sale and Delivery.
The values  stored in the databank should only be used as guidelines for
component   design.  In  giving  these  values  neither  guarantee,  nor
assurance of particular material properties can be given.

techcenter.lanxess.com

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012