View list of
- All A. Schulman grades
- All PP grades
- All grades beginning with P
CAMPUS® datasheet | POLYFORT® FIPP 20 T LE K1832
This datasheet of POLYFORT® FIPP 20 T LE K1832 from A. Schulman GmbH is provided by the international plastics database CAMPUS.
You may contact the supplier for more information about this grade.
POLYFORT® FIPP 20 T LE K1832 | PP-T20 | A. Schulman GmbH
Informação do produto
20% talc filled low emission PP copolymer compound with increased impact strength for automotive interior parts (VW TL 52388-B); increased scratch resistance
| Propriedades reológicas | Valor | Unidade | Método de ensaio |
| Índice de fluidez volumétrico, MVR | 7 | cm³/10min | ISO 1133 |
| Temperatura | 230 | °C | ISO 1133 |
| Carga | 2.16 | kg | ISO 1133 |
| Propriedades mecânicas | Valor | Unidade | Método de ensaio |
| Módulo de tração | 1500 | MPa | ISO 527-1/-2 |
| Tensão no escoamento | 21 | MPa | ISO 527-1/-2 |
| Deformação no escoamento | 5 | % | ISO 527-1/-2 |
| Deformação nominal na ruptura | >50 | % | ISO 527-1/-2 |
| Resistência ao impacto Charpy , +23°C | N | kJ/m² | ISO 179/1eU |
| Res. impacto Charpy c/entalhe, +23°C | 10 | kJ/m² | ISO 179/1eA |
| Propriedades térmicas | Valor | Unidade | Método de ensaio |
| Temperatura de deflexão térmica, 1.80 MPa | 48 | °C | ISO 75-1/-2 |
| Temperatura de deflexão térmica, 0.45 MPa | 103 | °C | ISO 75-1/-2 |
| Coef. de expansão térmica linear, paralelo | 80 | E-6/K | ISO 11359-1/-2 |
| Propriedades elétricas | Valor | Unidade | Método de ensaio |
| Constante dielétrica, 100Hz | 2.8 | - | IEC 60250 |
| Constante dielétrica, 1MHz | 2.8 | - | IEC 60250 |
| Fator de dissipação dielétrica, 100Hz | 20 | E-4 | IEC 60250 |
| Fator de dissipação dielétrica, 1MHz | 10 | E-4 | IEC 60250 |
| Resistividade volumétrica específica | >1E13 | Ohm*m | IEC 60093 |
| Resistividade superficial específica | >1E15 | Ohm | IEC 60093 |
| Outras propriedades | Valor | Unidade | Método de ensaio |
| Absorção de água | 0.04 | % | Sim. to ISO 62 |
| Densidade | 1050 | kg/m³ | ISO 1183 |
| Propriedades para cálculos reológicos | Valor | Unidade | Método de ensaio |
| Condutividade térmica do fundido | 0.38 | W/(m K) | - |
| Capacidade térmica específica do fundido | 1520 | J/(kg K) | - |
| Difusividade térmica | 2.6E-7 | m²/s | - |
| Temperatura de ejeção | 100 | °C | - |
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulado
Aditivos
Desmoldante
Disponibilidade regional
Disclaimer
The information and recommendations contained in this document are based upon
data collected by A. Schulman and are believed to be reliable; however, because
A. Schulman cannot anticipate or control the many different conditions under
which this information and/or product may be used, no representation is made
and no warranty is given of any kind, express or implied, for completeness,
accuracy, availability, suitability, usefulness, commercial value, or non-violation
of intellectual property rights of information, recommendations, and products
and services directly or indirectly provided. A. Schulman assumes no responsibility
for the results of the use of products and processes described herein and expressly
disclaims the implied warranties of merchantability and fitness for a particular use
If there are questions to given information, to further properties or further A. Schulman
products please contact
A. Schulman GmbH
Huettenstrasse 211
50170 Kerpen
Tel: 02273 / 561-0
Contact: aschulman@de.aschulman.com
Subject: Material data
The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH.
M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors.
Any decision about the application of materials must be double checked with the producer of this material.
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012
CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012











