View list of

CAMPUS® datasheet | POLYMAN® (ABS) LP 137 A


This datasheet of POLYMAN® (ABS) LP 137 A from A. Schulman GmbH is provided by the international plastics database CAMPUS.

You may contact the supplier for more information about this grade.

This datasheet includes:

  POLYMAN® (ABS) LP 137 A | ABS | A. Schulman GmbH
Informação do produto
Impact ABS grade with antistatic


Propriedades reológicasValorUnidadeMétodo de ensaio
Índice de fluidez volumétrico, MVR 22 cm³/10min ISO 1133
Temperatura 220 °C ISO 1133
Carga 10 kg ISO 1133
Propriedades mecânicasValorUnidadeMétodo de ensaio
Módulo de tração 2200 MPa ISO 527-1/-2
Tensão no escoamento 48 MPa ISO 527-1/-2
Deformação no escoamento 2.3 % ISO 527-1/-2
Resistência ao impacto Charpy , +23°C N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 18 kJ/m² ISO 179/1eA
Propriedades térmicasValorUnidadeMétodo de ensaio
Temperatura de amolecimento Vicat, 50°C/h 50N 96 °C ISO 306
Flamabilidade a 1.5mm esp. nom. HB class IEC 60695-11-10
Espessuras do tubo de teste 1.5 mm IEC 60695-11-10
Recognição UL UL - -
Propriedades elétricasValorUnidadeMétodo de ensaio
Resistividade volumétrica específica >1E13 Ohm*m IEC 60093
Resistividade superficial específica >1E15 Ohm IEC 60093
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1050 kg/m³ ISO 1183
Diagrama
Volume específico - temperatura (pvT) , POLYMAN® (ABS) LP 137 A, ABS, A. Schulman
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulado
Características especiais
Antiestático
Disponibilidade regional
Disclaimer
The information and recommendations contained in this document are based upon
data collected by A. Schulman and are believed to be reliable; however, because
A. Schulman cannot anticipate or control the many different conditions under
which this information and/or product may be used, no representation is made
and no warranty is given of any kind, express or implied, for completeness,
accuracy, availability, suitability, usefulness, commercial value, or non-violation
of intellectual property rights of information, recommendations, and products
and services directly or indirectly provided. A. Schulman assumes no responsibility
for the results of the use of products and processes described herein and expressly
disclaims the implied warranties of merchantability and fitness for a particular use

If there are questions to given information, to further properties or further A. Schulman
products please contact

                  A. Schulman GmbH
                  Huettenstrasse 211
                  50170 Kerpen
                  Tel: 02273 / 561-0
                  Contact: aschulman@de.aschulman.com
                               Subject: Material data

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012