View list of
  • All DSM grades
  • All PA46 grades
  • All grades beginning with S

CAMPUS® datasheet | Stanyl® TW363


This datasheet of Stanyl® TW363 from DSM Engineering Plastics is provided by the international plastics database CAMPUS.

This datasheet includes:

  Stanyl® TW363 | PA46-I | DSM Engineering Plastics
Informação do produto
Heat Stabilized, Impact Modified

ISO 1043 PA46-I

Stanyl website
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
Módulo de tração 1850 / 600 MPa ISO 527-1/-2
Tensão no escoamento 60 / 45 MPa ISO 527-1/-2
Deformação no escoamento 20 / 25 % ISO 527-1/-2
Deformação nominal na ruptura >50 / >50 % ISO 527-1/-2
Resistência ao impacto Charpy , +23°C N / N kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C N / N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 75 / 125 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 26 / 30 kJ/m² ISO 179/1eA
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
Temperatura de fusão, 10°C/min 295 / * °C ISO 11357-1/-3
Temp. de transição vítrea, 10°C/min 75 / * °C ISO 11357-1/-2
Temperatura de deflexão térmica, 1.80 MPa 90 / * °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 200 / * °C ISO 75-1/-2
Temperatura de amolecimento Vicat, 50°C/h 50N 250 / * °C ISO 306
Coef. de expansão térmica linear, paralelo 180 / * E-6/K ISO 11359-1/-2
Coef. de expansão térmica linear, perpend. 200 / * E-6/K ISO 11359-1/-2
Flamabilidade conforme índice de oxigênio 27 / * % ISO 4589-1/-2
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
Constante dielétrica, 100Hz 3.6 / 14 - IEC 60250
Constante dielétrica, 1MHz 3.2 / 4 - IEC 60250
Fator de dissipação dielétrica, 100Hz 120 / 6500 E-4 IEC 60250
Fator de dissipação dielétrica, 1MHz 190 / 1000 E-4 IEC 60250
Resistividade volumétrica específica 1E13 / 1E7 Ohm*m IEC 60093
Resistividade superficial específica * / 1E13 Ohm IEC 60093
Resistência elétrica 25 / 15 kV/mm IEC 60243-1
Índice comparativo de linha de fuga 475 / - - IEC 60112
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 11 / * % Sim. to ISO 62
Absorção de umidade 2.95 / * % Sim. to ISO 62
Densidade 1100 / - kg/m³ ISO 1183
Propriedades para cálculos reológicosValorUnidadeMétodo de ensaio
Densidade do fundido 913 kg/m³ -
Condutividade térmica do fundido 0.24 W/(m K) -
Capacidade térmica específica do fundido 2550 J/(kg K) -
Difusividade térmica 9.82E-7 m²/s -
Diagrama
Tensão - deformação , Stanyl® TW363, PA46-I, DSM
Tensão - deformação , Stanyl® TW363, PA46-I, DSM
Módulo secante - deformação , Stanyl® TW363, PA46-I, DSM
Módulo secante - deformação , Stanyl® TW363, PA46-I, DSM
Volume específico - temperatura (pvT) , Stanyl® TW363, PA46-I, DSM
Características
Processamento
Moldagem por injeção, Extrusão de perfis, Outros tipos de extrusão
Forma de entrega
Granulos
Características especiais
Galvanizável., Estável contra o calor
Disponibilidade regional
Disclaimer
 All information supplied by or on behalf of DSM in relation to its
products, whether in the nature of data, recommendations or otherwise,
is supported by research and, in good faith, believed reliable, but DSM
assumes no liability and makes no warranties of any kind, express or
implied, including, but not limited to, those of title, merchantability,
fitness for a particular purpose or non-infringement or any warranty
arising from a course of dealing, usage, or trade practice whatsoever
in respect of application, processing or use made of the aforementioned
information or product. The user assumes all responsibility for the use
of all information provided and shall verify quality and other properties or
any consequence from the use of all such information.

Typical values are indicative only and are not to be construed as being
binding specifications.

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012