View list of
  • All LANXESS grades
  • All PA6 grades
  • All grades beginning with D

CAMPUS® datasheet | Durethan® BKV 30 G W1


This datasheet of Durethan® BKV 30 G W1 from LANXESS Deutschland GmbH is provided by the international plastics database CAMPUS.

This datasheet includes:

  Durethan® BKV 30 G W1 | PA6-GF30 | LANXESS Deutschland GmbH
Описание продукта
PA 6, 30 % glass fibres, injection moulding, weather stabilized
Реологические свойствасухой / кондЕдиницаСтандарт
Усадка при литье, продольная 0.2 / * % ISO 294-4, 2577
Усадка при литье, поперечная 0.6 / * % ISO 294-4, 2577
Механические свойствасухой / кондЕдиницаСтандарт
Модуль упругости при растяжении 9900 / 6600 МПа ISO 527-1/-2
Напряжение при разрыве 180 / 106 МПа ISO 527-1/-2
Удлинение при разрыве 2.7 / 6.1 % ISO 527-1/-2
Ударная вязкость по Шарпи, +23°C 60 / 65 кДж/м2 ISO 179/1eU
Ударная вязкость по Шарпи, -30°C 50 / 40 кДж/м2 ISO 179/1eU
Прокол - максимальное усилие, +23°C 840 / - Н ISO 6603-2
Прокол - максимальное усилие, -30°C 740 / - Н ISO 6603-2
Энергия прокола, +23°C 3 / - Дж ISO 6603-2
Энергия прокола, -30°C 2 / 2 Дж ISO 6603-2
Электрические свойствасухой / кондЕдиницаСтандарт
Сравнительный показатель пробоя 500 / - - IEC 60112
Прочие свойствасухой / кондЕдиницаСтандарт
Водопоглощение 6.4 / * % Sim. to ISO 62
Поглощение влаги 2 / * % Sim. to ISO 62
Плотность 1370 / - кг/м³ ISO 1183
Особые свойства материаласухой / кондЕдиницаСтандарт
Коэффициент вязкости 140 / * см³/г ISO 307, 1157, 1628
Параметры для расчета реологических свойствЗначениеЕдиницаСтандарт
Плотность расплава 1160 кг/м³ -
Теплопроводность расплава 0.223 Вт/ (м К) -
Удельная теплоемкость расплава 2140 Дж/(кг K) -
Эффективный коэффициент теплопроводности 9.03E-8 м²/с -
Температура при извлечении из пресс-формы 140 °C -
Параметры изготовления образцов для испытанийЗначениеЕдиницаСтандарт
Литье под давлением, температура расплава 280 °C ISO 294
Литье под давлением, температура пресс-формы 80 °C ISO 10724
Особые свойства и характеристики
Способы переработки
Литье под давлением
Вид поставки
Гранулы
Особые показатели
Стабилизированный к УФ или погодостойкий
Доступность материала по регионам
Дискламация
This information and our  technical advice - whether verbal, in  writing
or by way of trials - are  given in good faith but without warranty, and
this  also  applies  where  proprietary  rights  of  third  parties  are
involved.  Our advice does not release you from  the obligation to check
its validity and to test our  products  as to their  suitability for the
intended processes and uses.  The  application, use  and  processing  of
our products and the products manufactured  by  you  on the basis of our
technical  advice  are  beyond our control and, therefore, entirely your
own  responsibility.  Our  products  are  sold  in  accordance  with our
General  Conditions of Sale and Delivery.
The values  stored in the databank should only be used as guidelines for
component   design.  In  giving  these  values  neither  guarantee,  nor
assurance of particular material properties can be given.

techcenter.lanxess.com

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012