View list of
  • All LANXESS grades
  • All PA66 grades
  • All grades beginning with D

CAMPUS® datasheet | Durethan® A 30 H3.0


This datasheet of Durethan® A 30 H3.0 from LANXESS Deutschland GmbH is provided by the international plastics database CAMPUS.

This datasheet includes:

  Durethan® A 30 H3.0 | PA66 | LANXESS Deutschland GmbH
材料文字说明
PA 66, non-reinforced, injection moulding, heat-ageing stabilized
流变性能干 / 已调节单位测试标准
模塑收缩率, 平行 0.8 / * % ISO 294-4, 2577
模塑收缩率, 垂直 0.9 / * % ISO 294-4, 2577
机械性能干 / 已调节单位测试标准
拉伸模量 3500 / 1300 MPa ISO 527-1/-2
屈服应力 95 / 55 MPa ISO 527-1/-2
屈服伸长率 4.5 / 20 % ISO 527-1/-2
名义断裂伸长率 - / >50 % ISO 527-1/-2
无缺口简支梁冲击强度, +23°C 160 / 190 kJ/m² ISO 179/1eU
无缺口简支梁冲击强度, -30°C 100 / 100 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 10 / 20 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 10 / 10 kJ/m² ISO 179/1eA
热性能干 / 已调节单位测试标准
熔融温度, 10°C/min 261 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 70 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 200 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 60 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 100 / * E-6/K ISO 11359-1/-2
电性能干 / 已调节单位测试标准
相对介电常数., 100Hz 3.8 / 13 - IEC 60250
相对介电常数., 1MHz 3.4 / 4.1 - IEC 60250
介质损耗因子, 100Hz 120 / 3200 E-4 IEC 60250
介质损耗因子, 1MHz 570 / 1000 E-4 IEC 60250
体积电阻率 >1E13 / 1E10 Ohm*m IEC 60093
表面电阻率 * / 1E13 Ohm IEC 60093
介电强度 31 / 25 kV/mm IEC 60243-1
相对漏电起痕指数 600 / - - IEC 60112
其它性能干 / 已调节单位测试标准
吸水性 8.5 / * % 类似ISO 62
吸湿性 2.8 / * % 类似ISO 62
密度 1140 / - kg/m³ ISO 1183
流变计算用参数价值单位测试标准
熔体密度 970 kg/m³ -
熔体 0.225 W/(m K) -
熔体的比热 2900 J/(kg K) -
有效导热率a 8E-8 m²/s -
喷射温度 185 °C -
试样制备条件价值单位测试标准
注塑, 熔体温度 280 °C ISO 294
注塑, 模具温度 80 °C ISO 10724
典型数据
加工方法
注塑
供货形式
粒料
特殊性能
经热稳处理的/耐热的
地区供应
权利义务的法律声明
This information and our  technical advice - whether verbal, in  writing
or by way of trials - are  given in good faith but without warranty, and
this  also  applies  where  proprietary  rights  of  third  parties  are
involved.  Our advice does not release you from  the obligation to check
its validity and to test our  products  as to their  suitability for the
intended processes and uses.  The  application, use  and  processing  of
our products and the products manufactured  by  you  on the basis of our
technical  advice  are  beyond our control and, therefore, entirely your
own  responsibility.  Our  products  are  sold  in  accordance  with our
General  Conditions of Sale and Delivery.
The values  stored in the databank should only be used as guidelines for
component   design.  In  giving  these  values  neither  guarantee,  nor
assurance of particular material properties can be given.

techcenter.lanxess.com

The CAMPUS internet database is hosted by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

CAMPUS® is a registered trademark of CWFG mbH, Frankfurt am Main, 2012